Separate names with a comma.
You can still find o2 spacers on Aliexpress since they're banned on ebay and amazon
With the non-foulers the wires rub against the heat shield and will wear through and short circuit. But looks like that one sticks out less so...
Yea I guess it is a faulty sensor. The voltage should not be high when the engine is not even running, right? 0.66v before cold starting engine...
Well this is interesting. I put the extra new sensor in an other prius (a gen 3), and initially I was seeing high voltage around 1.2v, and it soon...
No O2S need 10 min idle and 2 min >25mph according to some random pdf I found... Well I got all monitors ready except evap so... it fixed...
I plugged in the other o2 sensor and went for test drive with it dangling in cabin and got P0137 instead... Then I plugged back in the installed...
maybe u got one of those fake $45 cats
since cat was stolen the sensor was replaced with a $15 ebay sensor. but since installing the cat and sensor it is always immediately throwing...
Is it on IGN? I checked voltage with IGN on and didnt see anything.. cause if it is it seems like convenient point to tap power for dash cam.
[ATTACH] Which one goes where?
[ATTACH]
here's what it looks like without any of the extra features [ATTACH] no ign, only constant 12v and gnd... no good for dash cam
there is no ign... ground is white with black stripe it appears
It looks like u have to spoof data on communication line rather than simply pull up the voltage on a line. U would have to reverse engineer the...
well it is a floating caliper so as long as the disc isnt touching the bracket then i guess it will be ok after the pads wear to match the new...
What the hell is this... the other package (I bought two of them) has a different chart that looks like yours and does mention Prius... [ATTACH]...
**** these MOOG shims the template is just blatantly wrong. [ATTACH] [ATTACH] [ATTACH] Mine doesn't even mention Prius on the instruction sheet....
How do I view list of posts I've liked?
yes it pulls to the right even after tie rod alignment, yes the tires always wear out prematurely at the edges and yes it has
[IMG] So according to this document the min/max toe is -0.01 and 0.29, so I'm assuming the target I should aim for is the average right between...
