Separate names with a comma.
The spark plugs definitely require a 14mm spark plug socket. I have done multiple sets of these. I assume we are talking about the 10-15 Prius and...
Buy an engine from a wrecked car, not a flood car. Make sure it was a rear hit, not a front hit. Don’t ask me how I know... If it is a low...
You have posted many times about this car and we have told you repeatedly that you either need to replace your head gasket (probably too late now)...
Sounds like your surface was not prepped correctly. RTV never wipes off in the manner described. iPhone ? Pro
Did you follow the pattern in the FSM and squeeze your bead of silicone on the inside portion of the holes? iPhone ? Pro
Do you have a picture? iPhone ? Pro
That is strange. Every oil pressure switch I have ever installed has been with thread sealant. Never had any leaks either. The one on my Prius...
The oil pressure switch is sealed using thread sealant. Loctite is only used to seal threads to prevent the object from backing out; it is not...
From the picture, the “nub” on the crank looks like it is past 12 o clock. If you reinstall the crank bolt with the timing cover, do your marks...
The cams look correct to me. I cannot find my picture of the crank anymore, but I recall the colored link on the crank being closer to 3-o’clock....
Do you have a picture of your timing marks after the engine was timed? iPhone ? Pro
Did you make sure the chain tensioner unlocked before you started the engine? iPhone ? Pro
I would try a piston soak using ACDelco X66P or try a 10k interval with Valvoline Premium Blue Restore 10W-30. The Cummins/Valvoline team...
You do not need the copper spray, but you do need to apply fipg (or equivalent) underneath the headgasket in the specified areas. This is to...
You can buy them individually. iPhone ? Pro
No amount of BG snake oil is going to fix an active misfire. These are maintenance products at best. You need to have your car diagnosed to...
You will probably need brake pads by 200K. Once the pad thickness gets below 3mm, the pad material tends to crack and because you have less...
Slip joint pliers to get it started, then carefully use a chisel and a hammer if the tab is extra super stubborn. The tab is supposed to keep...
Like I said in your other thread, the tabs need to be bent back. Using a socket is the only way. You can try lubing the seals with silicone...
RTV usually requires some amount of clamping force between the two surfaces. iPhone ? Pro
