Separate names with a comma.
All head gaskets are “flat.” You’re looking for breaks or abnormally flat spots. iPhone ? Pro
The HG would fail first. OP needs to have the head inspected by a machine shop. There could be cracks that are not visible to the naked eye....
And then you can bring their list of “recommendations” to the meet for a 2nd opinion. [emoji1787] iPhone ? Pro
You missed the dirty tires. [emoji1787] iPhone ? Pro
On what basis? The car is well out of warranty. iPhone ? Pro
The clamp will always require replacement. Replacing the inner cv boot is not that difficult. The trickiest part is removing the tripod from the...
Just have a pan under the trans before you remove the axle. Top off as needed. iPhone ? Pro
If you get stuck, reach out to me and I can walk you thru it. I have done a lot of these on Toyota axles and they are all the same. [MEDIA]...
P0117 tells me your engine coolant became very, very hot. Stop driving your car until you figure out the cause of the coolant loss.
Those numbers seem a bit high. In my area, any running Prius (regardless of model year) with 150K+ seem to fetch between 4-6K depending on...
Usually the issues do not manifest until around 150K, so if he/she can miraculously find a decent one with 75-100K it can work out. But I agree...
What is a running 2012 with 209k worth? You’ll have 2K+ invested into this one in order to get it running, which is probably not much less than...
Didn’t you add a bunch of stop leak? iPhone ? Pro
Stop leak is “heavy” and tends to settle in the lowest point of the system. You may want to consider replacing the engine radiator as well....
They come out fairly easily. The aftermarket axles are very poor quality, all of them. I would rebuild the original axle if at all possible.
That sounds about right.
Part #04437-47033, about $40.
A little secret about doing any suspension work (especially struts or control arms): unstake and remove the axle nut, then push in the axle. This...
You can try a HF o-ring kit. O-Rings & Grommets - Harbor Freight Tools Nitrile should be fine. Coolant compatibility, at least in that...
Honda used that style of cotter pin on their vehicles during the 2000's.
