Separate names with a comma.
I am glad to see you propose something empirically testable. I have just done this in my gen 3. After starting the system and shifting out of...
The gen 3 steering ECU only provides assist in READY mode: this surprised me a little, because my gen 1 would provide assist in IG-ON mode and...
Now who can argue with that?
Hmm. Maybe C1203 can crop up in a situation like that? It's not like C1259 and C1310, the codes that actually mean "hey the hybrid control ecu has...
I'm not sure that my 'min' value is always the same. It puzzles me. Perhaps the car computes the min passing value itself depending on some...
It would be super helpful to plug that OBD-II scan tool back in and use it to watch the coolant temperature while warming up (or trying to warm...
Fortunately, the ones who aren't awed by my assertiveness are able to confirm the details I use—which is the approach I'd recommend more...
Drop the glove box and take the cabin filter out, and you can watch through the filter slot and see that door move.
At some time in your life about something, I have no doubt. This thread keeps bringing down your average though. Nine words into that post, you...
No separate horn fuse in gen 3. The high-pitch (blue) and low-pitch (black) horn wires just run straight from the integration relay to the horns....
"Limp mode" is often used differently by different people. It can mean: an actual reduced-power mode the car enters, as programmed, in response...
That's quite a lot of ersatz technical detail to handwave into existence behind a method of operation you have made up. The thread you linked in...
People hooking inverters to the traction battery have generally limited the inverter capacity to the amount of power the car can replenish while...
Not so much about how tight the rail bolts are, more a matter of technique getting the injectors and their O rings into the rail. [img] [img]...
How did you determine this? Was the coolant spilled near the area of the transmission where the resolver wiring plugs in? [img] Is the P0A4B...
That revised valve has been out for years now and still PriusChat doesn't know what they changed, because nobody who has bought one has been...
Like a lot of plastic covers made with claws that bend when it is first snapped on at the factory, but not really intended to be removed after...
My DSL went out a year ago this month when a tech went up the pole to fix a problem reported by my neighbor down the block, and while fixing hers,...
Pulling that fuse killed abs mtr 1, abs mtr 2, and everything fed by the integration relay (including the horn, low-beam headlights, backup...
No. The amount of drag created by MG1's permanent-magnet rotor spinning is determined by the amount of current allowed to flow in the windings....
