Separate names with a comma.
I took the assembly apart and noticed some of the ski jump seems compromised. I don't see much lube left on the threads either. Would a silicone...
I might like to bench test that if possible but not sure how to do that. I see there are six pins for the connector.
yeah, I saw those two bearings and thought I could screw those up if I took the cleanup too far. below the plastic there really isn't much of a...
I've found quite a bit of clogging and carbon buildup in the intake manifold and EGR assembly. I'm planning to clean with carb cleaner and an...
What is with the damper plates with orange spacers in two opposite springs? these look like the black spacers used at the fuel rail but they're...
Interestingly, the damper springs in the first power train were not damaged by the hydrolocking or by the catastrophic engine failure.
I haven't even looked in the EGR cooler yet where I'm guessing there's clogging but there for sure is clogging in the small intake manifold ports.
This cars first ICE was repeatedly hydrolocked with the result that the number 1 piston rod bent and eventually broke. In the recent trouble with...
If I recall correctly, when I worked on this car several years back, it had the head gasket failure in cylinder 1 or between 1 and 2. At the time,...
I saw an engine on LKQ with 60K for $750 shipped. I would also consider a rebuilt but I'm guessing that would be quite a bit more. I'd...
It also had the P261b code for coolant pump which I think went along with the overheating. I don't mind doing the head gasket but a bent piston...
The car has 180K but the engine has around 120K.
This particular car has already been down the bent piston road so if there's a head gasket issue, I will definitely be checking that. Would the...
I'm fixing a Gen 3 Prius that I will likely use personally, possibly for Uber or similar tasks. I am replacing the input damper plate which has...
I bought a used damper plate (I'm cheap like that) which has orange plugs/spacers within two opposing springs. (The red paint in the middle is...
I think my techstream is maybe some asian knockoff or something. Right now, it won't go past the vehicle ID screen which could be because I'm...
I'm also planning a leak down test with and without oil in cylinders after the engine is removed so not sure the compression test is needed.
