Separate names with a comma.
Well, our 2011 Winter Gray Metallic Prius level 3 has given us 138K pretty much trouble free miles, and we have decided to move on to something...
The traction battery is a major contributor to that weight. SM-G781V ?
After maintenance performed? Could be something as simple as the oil change door not being fastened back properly, if some of the fasteners are...
You should buy them and replace them in pairs. You can keep the passenger bulb as an emergency spare bulb, but you might end up needing to replace...
You say you bought a new Sylvania 9005 bulb, that's a single filament bulb for the highbeam on a 2010 Toyota Prius. As noted, the low beam bulb...
Some pictures from the listing. [ATTACH] SM-G781V ?
I searched the seller's inventory and found these adapters made for the type of pinch welds your car seems to have. They have wider channels in...
Those are really solid, but I bet they are back breakers too. These are 5 lbs per pair and give about 2.5 inches of lift, enough to get a jack...
Check your front sway bar end links too. You didn't say how many miles you have on the odometer, but our 2011 Prius hatchback had front sway bar...
You would just need to shim the adapter with some washers, and possibly use longer bolts to make the slot wider to accommodate the width of your...
I ordered a pair of these pinch weld adapters for the Pittsburgh 3T aluminum jackstands, I am using a smaller pair from the same guys a few years...
Nice, we're in a similar situation. My wife's daily driver, a 2011 Prius, has 134K trouble free miles on it and I'm thinking about moving on to a...
Yes, that is a limitation of this type of jack. I'm not going to be doing really high lifts, so I don't think it will be much of a factor. I did...
Look for an adapter for the pinch weld to jack interface. There are many different types, ranging from rubber blocks with a groove. DEDC...
One of the reasons a floor jack is on wheels is to allow the jack to move as the lifting point moves through an arc, typically, as the side of the...
Those scissor jacks can be downright scary and unsafe, especially when used in the manner you propose, where you are using it to lift the opposite...
I did read the thread, and hubcentric centering rings were never mentioned in any of the previous posts. SM-G781V ?
Those are not Toyota oem wheels, so you should look into getting appropriately sized hubcentric rings with 54.1mm centerbores for your new wheels....
Also, specify if halogen or LED headlight assembly. Big difference if they're LEDs from a level 5 trim. SM-G781V ?
The Maintenance Required Soon message appears after 4500 miles since the last reset. Then after 5000 miles the message changes to Maintenance...
