Separate names with a comma.
Exhaust cam sprocket should have a dash at 12 o'clock. Intake cam sprocket has a "tab" sticking out at around 2 o'clock. Note: I installed the...
Yes
[ATTACH] Sorry, I forgot to update. Finished this last week. In addition to the extra fipg at the 6 locations on the cover, I also applied a bead...
[ATTACH] [ATTACH] [ATTACH] It is also easier to clean with the chain removed. Currently waiting for o-rings and gaskets to arrive so that I can...
Just wanted to. When I resealed in during the head gasket job, it was a bit sloppy in a few spots.
[ATTACH] [ATTACH] [ATTACH] Made some progress on mine tonight. Got the timing cover, cam housing and head cleaned. Still need to clean the block...
Got started on my reseal tonight. About 30-40 min in. [ATTACH]
That looks correct for the valve cover gasket. There is an "8" shaped gasket that is needed, not sure if your valve cover kit includes it?
The battery is either about to fail, or its lifespan has been drastically reduced. Plug-in batteries are a whole different animal than the normal...
Autozone is overpriced. Rockauto is a better option. However... The picture appears to have the w/p gasket, various o-rings for the block, two...
Yes, and you need to run a bead across the entire length of each joint. There are 6 total. This is in addition to adding extra on the timing cover...
These are the parts you will need: [ATTACH] Note: 96721-24015, qty 2 96723-24020, qty 3 I will be re-doing the job on my 2011 this week. Pay...
[ATTACH] Either will work, but the real difference becomes most apparent if the head bolts have any carbon deposits that may prevent the bit from...
Leakdown test or pressure-pulse sensor should verify the HG failure: [MEDIA] My opinion is that the HG and EGR issues are unrelated, but we can...
If we are talking about the crank pulley, then any decent air impact removes it. You may need some long 8x1.25 bolts to push the balancer off....
They do not recommend machining because it may cause timing issues.
Threebond's catalog says 1207b can be used for coolant. Their technical team also confirmed for me, when I asked via e-mail. If you use...
Coils and Injectors are unlikely to be your issue, at least not at the same time. The coils and injectors are very expensive for this car and...
Yes, engine removal is required for timing cover and cylinder head removal on the 2GR. It is actually fairly easy to drop the engine out of the...
p219a: "Fuel System Air-fuel Ratio Cylinder Imbalance Monitor The ECM uses the air fuel ratio sensor monitoring method and the crankshaft...
