Separate names with a comma.
The old ones leaked quite regularly, I have changed a number of them. The metal ones rarely leak. Not saying it does not happen, but it is rare....
The 1ZZ-FE's (old 1.8L in 03-08 Corolla) used an o-ring on the timing chain tensioner. The 2ZR 1.8L (09+ corolla) used a metal gasket, part #...
Why would a metal gasket leak?
Sounds like they are selling the battery at wholesale cost ($1600) and charging the normal 4 hr to install. Not a bad deal at all if you are due...
The picture is a bit dark, but I see both engine oil and possibly cv boot grease. Before continuing, I recommend degreasing and pressure washing...
Definitely replace the Spark plugs. The coolant ingestion will foul the spark plugs. Otherwise, water pump and thermostat.
Not likely, I would have expected this to have bent move than just the intake valves on cyl #1. Is it possible that you have debris or another...
Grease will dampen the noise temporarily if the pads fit poorly. Placing a small paper shim (temporarily) for a test drive will confirm if the...
If you want to rule out the brake pads, place a piece of business card between the pads and the bracket clips. Road test the car and see if the...
You mentioned that aftermarket head bolts were used. Were these TTY bolts and did their length match the originals? Incorrect bolts providing the...
Market price for a used engine installed can be high as $7K. I doubt you’ll find anyone to do it for less than $5k, at least not in my area....
Super price on OTC Tools 7509 at ToolTopia.com
If you still have the old axle, measure the distance between the dust shield and the end. Make sure it's the same, and also make sure the contact...
I never received my stickers from 5+ years ago. [emoji2371]
The outer joint does not need to be removed. After the inboard joint is removed, use a sharp chisel and gently tap off the tripod. Next, remove...
If you grab the inboard joint, give it a moderate tug, and it does not come out - it is fine. On an unrelated note, why did you replace the...
I have been using this in place of WS in a variety of applications. No issues yet. [ATTACH][ATTACH]
