Separate names with a comma.
Look at accumulator volts on most scan tools Steady voltage on 30 second window...find culprit with live data...
Yea gotta do cross reference and research on just about everything..anymore
I noticed the part numbers were different on the 2010 donor part compared to 2011 part [ATTACH] Leaking 2011 accumulator part number was...
I just bled mine using an autel Went smoothly... gotta go all way thru to the linear offset part .. then back to front wheels again...open...
[ATTACH] Leaking Actuator [ATTACH] Need enough fluid [ATTACH] don’t let run low during bleed [ATTACH] Did the swap.. no problem...
If you can’t inspect car properly have a mechanic do it for you .. worth the regrets ... a few simple tests can detect issues immediately! Good...
Visual inspection revealed the failure... [ATTACH] hissing and leakage at brake pedal under dash..
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Got the donor 2010 accumulator out today. The leaking accumulator cycled from 3.23V then up to barely...
[ATTACH] My 2011 198k...lit up the dash ...C1256... I hear hissing and see seepage at brake booster boot under dash. Raiding the parts off My...
If done properly rebuilds can last for years and fairly inexpensive...
My 2011 grayghost just fixing to cross 200K and started increasingly turning on that eeeeeeeh noise about every 10 sec. I started hearing air...
If cold and heater on... Prius will sacrifice economy over driver comfort... ICE runs to Heat up water for heater
Happened to me. I Changed batteries in both FOBS. No change ...Seemed Prius would shut down SKS. Driver nor passenger door worked as usual. KEY...
White Prius becomes parts vehicle. FI Wrecked. Found red 2011 touring 79K in MS. Also a gray 2011 IV touring Solar topped from Palm Beach
Yea I put it in D
It’s not any different from other jobs. Put a bead , seal, let cure. Actually very easy. I did mine in vehicle. Did a few dry runs putting cover...
Yea , I lucked out, was setting TDC and after 3 turns of crank hit that sweet spot...
Leak is usual to be just chain tensioner gasket Again 15 minutes Well maybe 30 It's a really hump over and reach over engine kinda thing
Takes 15 minutes to remove cowl
Actually pics dont give justice...was definitely baked/cooked on through and through...definitely there and more...coated thick,...probably a just...