Tombukt2's Recent Activity

  1. Tombukt2 liked ChapmanF's post in the thread Hatch garnish loose only at driver's side edge.

    Or just stuck. My relative's hatch was really sticking to the weatherstrip. I was trying to show "here's how you can just push the...

    Dec 24, 2024 at 10:26 PM

  2. Tombukt2 replied to the thread Hatch garnish loose only at driver's side edge.

    Once I get the new one mounted and all them place and everything's like sposed to be . I drill two pilot holes and put two black screws...

    Dec 24, 2024 at 7:22 PM

  3. Tombukt2 replied to the thread Hatch garnish loose only at driver's side edge.

    Yeah I find the '04 '05 switches are always in real good shape The rubber is real nice and still has the logo stamped in it and all that...

    Dec 24, 2024 at 7:20 PM

  4. Tombukt2 replied to the thread brake master.

    Over there in the Middle East I see all these posts on Facebook marketplace where they have dirt floored rooms full of Toyota boxes of...

    Dec 24, 2024 at 10:40 AM

  5. Tombukt2 replied to the thread brake master.

    Toyota dealership or Toyota online should just steer you to the direct part via your VIN or actually the two parts that will be...

    Dec 24, 2024 at 9:29 AM

  6. Tombukt2 replied to the thread Update Download for 2013 Prius 3.

    I wouldn't get yo carried away with this . Enjoy the car till ya cannot . No updates to the 3 really make anything happen just saying...

    Dec 24, 2024 at 7:56 AM

  7. Tombukt2 replied to the thread Replace front struts first gen Prius?.

    He make it hard . Computer guy .

    Dec 24, 2024 at 7:53 AM

  8. Tombukt2 replied to the thread Replace front struts first gen Prius?.

    I don't think use Allen wrench in stud wrench on nut no grips look at it man ..you will see. Or use grips of ya like that sort of thing

    Dec 24, 2024 at 7:52 AM

  9. Tombukt2 liked mr_guy_mann's post in the thread Passenger side high beam not working.

    IF the high beam shutter works on one side then all of the wiring from that headlight back to the control switch is fine. I would...

    Dec 24, 2024 at 7:50 AM

  10. Tombukt2 replied to the thread Have to unplug battery cables and hook them back up every time I start the car.

    That clears a fault . Now try n clear codes back to back with cheapo scanner or any scanner . Same result. Do this before unplugging 12V.

    Dec 24, 2024 at 7:50 AM

  11. Tombukt2 replied to the thread What are these caps called?.

    Heat is related to coolant three-way valve next to inverter pump on same brackett

    Dec 24, 2024 at 7:48 AM

  12. Tombukt2 replied to the thread Hatch garnish loose only at driver's side edge.

    The logo you grab to lift hatch ? You're hand pulls the metal piece out of the garnish slowly over time . Remember hard pulled in...

    Dec 24, 2024 at 7:46 AM

  13. Tombukt2 replied to the thread Have to unplug battery cables and hook them back up every time I start the car.

    That sounds like the hybrid isolation fault You should get a capable code scanner and see if that's in fact what you have I can't...

    Dec 23, 2024 at 7:39 PM

  14. Tombukt2 replied to the thread Gen 2 MFD (nav) - Vertical Lines on Nav screen....

    I usually just have a spare on hand to try so I don't know anything about all this as far as all of the disconnection and tracing

    Dec 23, 2024 at 7:36 PM

  15. Tombukt2 replied to the thread Replace front struts first gen Prius?.

    What top bolts vise grips absolutely not You're just taking three 12 or 14 mm nuts loose they're under the tray that center nut holds...

    Dec 23, 2024 at 6:35 PM
Show older items