Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
So here are the results after attempting to recondition the modules using 2 Tenergy T180 with a light bulb load added for discharging faster at a...
So hear are the results after attempting to recondition the modules using 2 Tenergy T180 with a light bulb load added for discharging faster at a...
[MEDIA] this is the brake actuator, does it sound good ?
KZYEE KM10 Power Circuit Probe Test results 1.yellow /probe powered car off no reading / coming from the TPMS reset/set button :resistance...
Agreed but the fuse which is being blown is responsible for many systems that it functions : Audio System (Radio & Display Receiver Type)...
When the driver assist is disconnected there is a click when powered from the seat belt control ecu and the power steering ecu/ when the driver...
So the fuse 10 amp ECU -IG no.2 is still blowing when the DRIVER ASSIST CONTROL MODULE OEM 86572-47030 is contacted when the car is put in...
The 12v is reading around 12.20 I tried googling your other recommendations, do you mean a Prolong hybrid battery charger? the modules are reading...
I have been checking the ecu fuses but I will have to recheck all the fuse especially the one under the fuse box which is a pain to get to Will...
Yea I was thinking about the auto store , but even if the 12v was bad and I charged it and used the booster. It should at least go into ready...
I found this on another thread called “ Immobilized by `BatScrazy” what sounds similar but like you said multiple factors.” The computer will...
It seems to hold a charge , say if I put it in accessory mode for 15 min to 30 mins it draws down to 11ish and I charge it backup to high 12’s...
I that would be found I assume with techstream datalist which last I checked was giving this , but all the other data list produced results.What...
Ok 5. I’m checking and rechecking all the connections. 6. Voltage Sensor when checked with the circuit probe with the dc connections into it...