Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
My usual test for a suspected head gasket leak is to get the engine hot. Then do a cooling system pressure test. Leave it pressurized overnight....
What are you trying to accomplish? The only crank position "data" on (any) scantool is RPM. Some cars have data showing whether or not the...
In general, P3000 sets in the hybrid ecu when the high voltage battery ecu has codes. Dr Prius is handy for viewing battery voltages, but isn't...
So, you have problems where the air inlet (fresh-recirc) and outlet (mode control) air doors do not move. Along with codes that say the ecu sees...
The Autel device only works with their own app (and vice versa). It can take a bit to set up but is generally less fiddly than the bootleg...
I would cut the original connector in half (lengthwise) and then plug the 2 resulting pieces onto your usb thing. Just be sure to get + & -...
The FIXD device appears to only access OBD2 ECM functions - "generic" codes and data for the engine computer. You need a more capable scantool...
Was this a one time event or is it repeatable? I would wonder why you're getting around 30 MPG. .
You've got what looks like a very minor oil seep on a 15-20 year old car. If that's all there is it might not be worth pursuing this. The only...
I would suggest cutting and splicing the wires at the white connector. Those are for the battery fan, and the fuel pump. Then I would clean and...
Why did you replace that coolant sensor? (I assume that's the sensor located at the bottom of the Coolant Heat Storage tank). Does the CHS pump...
OK, in that context "10k or higher" means that there should really be no continuity between the two circuits (aka - infinite resistance or "O L")....
Definitely has bent things. That's the only explanation for that much negative camber. Plus it looks like the tire is "set back" (to the rear) of...
So, when someone mentions a "machine like sound with a cadence", I think of the 3-way coolant control valve right near the inverter pump. One of...
The Coolant Heat Storage tank is a thermos that holds several quarts of coolant & keeps it hot for a few days. The pump fills the tank when you...
