Separate names with a comma.
Update: So I've been driving around the last few days with the thermostat taken out of the thermostat housing, running about 150-160 degrees...
Technically, the first one I tried was the one that arrived with the 4th gen engine which I put in my 3rd gen car. The second one I tried was an...
Boiled the OEM Toyota thermostat and it didn't open until 205-210 (F). It closed at 185-190 (F). My understanding (correct me if I'm wrong) is...
Update: I removed the thermostat from the thermostat housing as @Ragingfit has suggested and that did the trick. Drove over an hour and the temps...
Update: I have taken it to the dealership, but they refuse to diagnose it beyond simply replacing parts at $500 a piece (water pump, thermostat,...
I have wondered that (about temperature sensor). I would have thought that if the sensor was faulty then I would be getting wild readings. In...
Water pump has been replaced twice. Thermostat replaced twice. Heater core flushed. No coolant leaks. Replaced radiator. I've seriously done about...
@Ragingfit Hope you could advise on something: I blocked off the heater core and it seemed to run fine for about an hour. Next time I started up...
I forgot to include that I replaced my 2012 engine with a 2017 engine, with less than 50,000 miles. The old engine blew a headgasket due to...
I've not seen this specifically discussed here, but how does one bypass the heat exchanger? I'm having overheating issues and I've replaced pretty...
Thanks for the video. I forgot to include that I backflushed the heater core with no success in fixing the overheating - it didn't appear to be...
I replaced the 2012 engine (head gasket failure) with a 2017 engine. It's overheating despite replacing most of the coolant system.
So it's been a while but I have an update. I took it to the dealership in January and had them flush the coolant and refill (my thinking at the...
Both radiator fans blow correctly, as far as I can tell. I've never put stop leak in it. I don't have techstream - something I've put off for a...