1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Recent Content by gscotten

  1. gscotten
    Post

    Hazard Lights Problem Debug Info

    Pin 4 of junction block 3B. But I would not do that again. Spice a new wire from the yellow wire on the flasher switch to pin 8 of the flasher...
    Post by: gscotten, Aug 19, 2021 in forum: Gen 3 Prius Care, Maintenance & Troubleshooting
  2. gscotten
    Post

    Hazard Lights Problem Debug Info

    The problem certainly is originating inside the ABS unit. I fixed it by adding an air gap to the wire. :) Now everything is working except my...
    Post by: gscotten, Jun 28, 2021 in forum: Gen 3 Prius Care, Maintenance & Troubleshooting
  3. gscotten
    Post

    Hazard Lights Problem Debug Info

    Thanks! You've really been a big help. I agree that the logical cause of the trouble is in the ABS unit, but I thought that the junction blocks...
    Post by: gscotten, Jun 27, 2021 in forum: Gen 3 Prius Care, Maintenance & Troubleshooting
  4. gscotten
    Post

    Hazard Lights Problem Debug Info

    Thanks. According to the wiring diagram there are three inputs to the flasher module that are joined together at the junction block. I figure that...
    Post by: gscotten, Jun 26, 2021 in forum: Gen 3 Prius Care, Maintenance & Troubleshooting
  5. gscotten
    Post

    Hazard Lights Problem Debug Info

    I have the same problem, and sure would like to know where the Junction Block 3A and 3B is. The manual shows the layout, and I figured anything...
    Post by: gscotten, Jun 26, 2021 in forum: Gen 3 Prius Care, Maintenance & Troubleshooting