Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Yeah, all the air is out of the inverter loop. but still have to get more out of ICE loop. did not have this problem @ 100,000 service
thanks, took care of it but now when heat is on "max heat' it blows cold for 10-15 minutes if car is cold. In the past, it never came om until the...
is there a pic of the relay pulled and "jumped" to energize pump (to bleed system) on this site for reference purposes?
Do the computers on the vehicle need to be reprogrammed to "talk" to one another if the HV battery pack gets swapped?
Where can I find the paramaters for setting up the dc 6 for the gen II batt modules? I.E- Discharge amperage, etc.
No change in results. With car on, there is no voltage on the downstream terminals. probably due to the fact that is either how the system works,...
Upon removing service cover I saw one of the 3 plugs was not locked into place. Reconnected, disconnected 12V batt. at pos. terminal, drinking a...
12v battery was the first to get disconnected prior to removal of o.e. battery. Safety plug locked in place. Will pull plug, remove cover and...
Well my used battery came in and the swap was made to the point that the replacement battery is in and hooked up. Most bolts holding it down are...
What power rating UPS should one get for 4 dc6 chargers?
Looking forward to the video. One is posted on youtube abotu the gen II, as far as removal/installation goes. Not the best quality but I found it...
I will be monitoring it closely due to this being a new endeavor. How much airflow? Reason I ask is I have anything from a ceiling fan to a...
Thanks for the info. I will take your advice on this. By the way, due to scouring this site for info on balancing/charge/discharge, I am following...
I will be attempting to rebuild the HV pack out of my 06. I see that the charger to use is the supermate dc 6. It seems they need a transformer,...
