What did you do to ur Gen III Prius today????

Discussion in 'Gen 3 Prius Accessories and Modifications' started by sfv41901, Jul 23, 2012.

  1. sfprankster

    sfprankster Active Member

    Joined:
    Sep 25, 2014
    443
    490
    10
    Location:
    Santa Cruz Mountains, CA
    Vehicle:
    2014 Prius
    Model:
    Three
    Lots of elbow grease, microfiber towels and a carnauba paste wax makes the Faux Five all shiny like new. (y)

    IMG_4446.JPG

    IMG_4451.JPG

     
    C.R.E.A.M., ckam1989 and sfv41901 like this.
  2. drh20s

    drh20s Junior Member

    Joined:
    Oct 26, 2009
    55
    20
    0
    Location:
    GA
    Vehicle:
    2014 Prius
    Model:
    Three
    I have a brand new blacked-out 2014 Prius (below). The blue in the Prius emblem irked me to no end (cheesy-looking). So, I used a plastic bike tire-changing tool and popped the emblem off. That blue is a flimsy plastic sheet. After removing it I reattached the emblem. Now it looks elegant!

    [​IMG]
    [​IMG]
     
    Dawit and ckam1989 like this.
  3. drh20s

    drh20s Junior Member

    Joined:
    Oct 26, 2009
    55
    20
    0
    Location:
    GA
    Vehicle:
    2014 Prius
    Model:
    Three
    Also, I adjusted the rear wiper blade to be oriented perfectly vertical... Not sure why they don't manufacture it like that. Makes the lines straighter...
     
    ckam1989 likes this.
  4. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    what exactly did you do? any photos?
     
  5. sfprankster

    sfprankster Active Member

    Joined:
    Sep 25, 2014
    443
    490
    10
    Location:
    Santa Cruz Mountains, CA
    Vehicle:
    2014 Prius
    Model:
    Three
    Someone got sloppy after being told to work through their coffee break and missed by a spline or two?

    Should be simple, lift the plastic cover at the base of the rear wiper to expose the nut holding it in place. Remove the nut, lift the rear wiper assembly off the splined shaft and replace it, clockwise or counter clockwise a spline or two, to a vertical alignment. Replace the nut and snap down the plastic cover.
     
  6. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    I suppose what I'm wondering is... does it work properly.. surely wiper will overlap...

    OK I tried looks better.. but overlap bottom
     
  7. rcs3434

    rcs3434 Member

    Joined:
    Apr 29, 2012
    56
    163
    0
    Location:
    Danbury, ct
    Vehicle:
    2010 Prius
    Model:
    V
    I haven't really been able to cause I've been working, but here's a different one I took that day image.jpg
     
    Accordlayingkit and ckam1989 like this.
  8. rcs3434

    rcs3434 Member

    Joined:
    Apr 29, 2012
    56
    163
    0
    Location:
    Danbury, ct
    Vehicle:
    2010 Prius
    Model:
    V
    Got another package today!! Tanabe DF 210 springs, hopefully I can do this with the help of some threads on here.:confused:
    image.jpg
     
    Accordlayingkit, Burna J and ckam1989 like this.
  9. scotk

    scotk Junior Member

    Joined:
    Jun 1, 2008
    55
    8
    0
    Location:
    Denver, CO
    Vehicle:
    2011 Prius
    Model:
    Five
    I switched out the stock Bridgestone Turanzas...finally. The 2011 Gen III is my wife's car, so I don't drive it a whole lot. But when I do, I really notice the road noise inside the cabin. From what I've read, the Turanzas have a reputation for being loud and I've been counting down the days until we switched them out for something quieter.

    We have the 17" wheels on our Prius and I decided to go with the Michelin Premier A/S. Prior to the switch, I gathered some basic cabin noise data on the roads I commonly drive. The cabin is, on average, about 5-7 db quieter than when I was running the Turanzas. The noise difference is noticeable. At first, I was a bit disappointed with the numbers, until I did some research and realized that 5-7 db is pretty significant. It's my understanding that a 10 db reduction would mean that the new tires are half as loud. While it's not quite a 10 db difference, I'm pleased with the new rubber.

    If you're in the market for a quieter A/S and you feel like your cabin is pretty loud, I would recommend trying the Michelin Premiers.
     
    ckam1989 likes this.
  10. LuvintheMPG's

    LuvintheMPG's New Member

    Joined:
    Oct 4, 2014
    2
    0
    0
    Location:
    Asheville, NC
    Vehicle:
    2014 Prius
    Model:
    II
    Cool, thanks for the close up. I saw a bunch at sema last year but everyone I asked said their car was vinyl. I was really hoping to see plastidip out there. Most of the wraps are $2-3k and they didn't all look great but some did. If yours is even close to the quality and last like they say it does than it is a great value.
     
  11. zombiegristle

    zombiegristle Junior Member

    Joined:
    Oct 6, 2014
    15
    19
    0
    Location:
    -
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I hit 200 miles on my new Prius (just bought it Saturday!), and ordered a sharkfin and navcom sun shade hood thingy. Now I'm adding all kinds of stuff to my wishlist, I can already tell I'm going to love modding this car for years to come...
     
  12. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Congrats & welcome to PriusChat
     
  13. RightOnTime

    RightOnTime Senior Member

    Joined:
    Sep 21, 2012
    765
    1,634
    183
    Location:
    Kidnapped in OC, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Stopped by Cusco/Winmax Headquarters to pick up another set of front and rear pads. They asked if they can take a couple of pics of the underbody to confirm that there braces were compatible for the Plug In Prius.

    It was a pleasure to meet the Owner and the staff, they run a tight ship over there (y)(y)(y)

    042.JPG
     
  14. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Sweet
     
  15. ncases

    ncases Senior Member

    Joined:
    Jun 18, 2014
    609
    672
    0
    Location:
    Chicago
    Vehicle:
    2012 Prius
    Model:
    Two
    Tinted my windows yesterday. Waiting to cure for the next couple of days. image.jpg
     
    ckam1989 likes this.
  16. sfprankster

    sfprankster Active Member

    Joined:
    Sep 25, 2014
    443
    490
    10
    Location:
    Santa Cruz Mountains, CA
    Vehicle:
    2014 Prius
    Model:
    Three
    One more step away from the "Soccer Mom Mobile Syndrome" with the installation of 17" Drag DR-19 wheels and Yokohama YK580 215/45/17 tires.

    PriusWheelsTires.jpg
     
    #5276 sfprankster, Oct 10, 2014
    Last edited: Oct 10, 2014
    sfv41901 and Burna J like this.
  17. Burna J

    Burna J Knot Right Performance....

    Joined:
    Sep 18, 2012
    1,065
    3,335
    53
    Location:
    Long Beach, CA.
    Vehicle:
    2012 Prius
    Model:
    Three
    Very nice..... But you won't be able to park like that if you lower it.
    Just saying. :)
     
    sfv41901, Plus IV and sfprankster like this.
  18. sfprankster

    sfprankster Active Member

    Joined:
    Sep 25, 2014
    443
    490
    10
    Location:
    Santa Cruz Mountains, CA
    Vehicle:
    2014 Prius
    Model:
    Three
    I feel lucky to make it between the lines. :whistle:
     
    Burna J likes this.
  19. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    rcs3434 likes this.
  20. ncases

    ncases Senior Member

    Joined:
    Jun 18, 2014
    609
    672
    0
    Location:
    Chicago
    Vehicle:
    2012 Prius
    Model:
    Two
    After so many years of lifting patients in ICU I over tighten one of the lugs and snapped into two pieces Replace a broken stud bolt after swapping my CT200 wheels and getting ready for winter.
    followed that link when i installed my tanabe lowering springs and it was much easier. Thank you priuschat.
     
    #5280 ncases, Oct 10, 2014
    Last edited: Oct 10, 2014
    rcs3434 likes this.