1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Wheel size and turning radius?

Discussion in 'Prius c Accessories and Modifications' started by orangenerd, May 13, 2012.

  1. orangenerd

    orangenerd Junior Member

    Joined:
    Mar 31, 2012
    58
    1
    0
    Location:
    Lawton
    Vehicle:
    2012 Prius c
    Model:
    Three
    I am an amateur car guy...I am wondering if the 16" rims will affect my turn radius? I don't want my tires to be rubbing up against my wheel well if I upgrade to 16"s
     
    #1 orangenerd, May 13, 2012
  2. prius1driver

    prius1driver New Member

    Joined:
    Apr 6, 2012
    78
    6
    0
    Location:
    New York
    Vehicle:
    2012 Prius c
    Model:
    One
    Good point. I love to know the same.
     
    #2 prius1driver, May 13, 2012
  3. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,871
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Here you go
    2012 Toyota Prius C Four Full Test
     
    #3 JimboPalmer, May 13, 2012
  4. orangenerd

    orangenerd Junior Member

    Joined:
    Mar 31, 2012
    58
    1
    0
    Location:
    Lawton
    Vehicle:
    2012 Prius c
    Model:
    Three
    I have read that but
    wasn't sure about aftermarket rims and tires
     
    #4 orangenerd, May 13, 2012
  5. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,871
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    I would assume Toyota bought the best it could, you are free to assume otherwise.
     
    #5 JimboPalmer, May 14, 2012
  6. John337

    John337 Junior Member

    Joined:
    Apr 11, 2012
    8
    3
    0
    Location:
    Kenmore, WA
    Vehicle:
    2012 Prius c
    Model:
    Two
    Toyota also increased the offset on their 16" wheel option to about 50mm. The offset is 40mm on the 15x5 wheels. I assume that this was to keep the wider wheels and tires tucked under the fenders. (Note that Toyota's spec for the track on a car with 16" wheels is 2cm less than standard.) They had to change turning radius to accomodate the extra tire width at the inside of the fender. If you use an aftermarket wheel with an offset close to 40mm then your turning radius won't change much assuming your tires don't rub.
     
    #6 John337, May 14, 2012
(You must log in or sign up to post here.)