1. Attachments are working again! Check out this thread for more details and to report any other bugs.

  1. Pandas Andpresents

    Pandas Andpresents Junior Member

    Joined:
    Jun 15, 2014
    37
    9
    0
    Location:
    Danbury, CT
    Vehicle:
    2011 Prius
    Model:
    Three
    Hello all!

    I had a heat shield replaced on my 2011 Prius. Driving the car since, I have noticed a noise when hitting bumps in the road.

    When I looked underneath the car today, there was a metal piece hanging down. It looks like screws are possibly missing at the end.

    What is this? Could the dealership have forgotten to reattach whatever this is? Clearly, I’m not going to drive the car around like this over long distances, but is it dangerous to drive the car at all?


    B68E1C7E-4764-4611-8D0E-2BD7B6A53398.jpeg
     
  2. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    That looks like the frame cross piece that sort of stiffens the car. You might get more informed responses on the Gen 3 forum rather than the Prime forum. Just click the "Report" button on your original post and ask a moderator to move it.
     
  3. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I would not drive the car till that's fixed: it'll only compound the damage that's already occurred, and it could fly off, be a liability, a danger to other cars on the road.

    Do you have a floor jack and safety stands, ramps, tools, what's your situation?
     
  4. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,795
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Yep - Looks like the Front Center Floor Brace.
    Screen Shot 2019-11-10 at 1.20.06 PM.png
     
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    looks like they forgot to tighten the bolts after replacing the heat shield.

    i think they owe you one
     
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    ^ This. Could be the brace is ok, just a little scraped. But there's more'n likely at least 2 bolts missing.

    Was crawling around under ours yesterday, rust-proofing, took this pic:

    IMG_1449.JPG
     
  7. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Interesting how pristine it looks; I've never put anything on it either. Maybe cus it's amidships, gets less salt kick-up?
     
    Pandas Andpresents likes this.
  8. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    Just crawling around, eh:whistle:?

    I know I take pics when I’m doing that under the car:p.

    Very nice pic and condition of the piece in question (y).
     
  9. Pandas Andpresents

    Pandas Andpresents Junior Member

    Joined:
    Jun 15, 2014
    37
    9
    0
    Location:
    Danbury, CT
    Vehicle:
    2011 Prius
    Model:
    Three
    Thank you so much, everyone!

    Sorry that the post is in the wrong forum. I went for a run Sunday morning. I heard the noise while driving and was posting from the park - so, my cellphone. The cellphone view of the forums isn't optimal and I didn't notice that I put the post in the section for the wrong type of car.

    I didn't expect the Toyota service center that "repaired" the heat shield to be open on Sunday, but they were. You all are correct. They said it was the "exhaust bracket" and that the mechanic forgot to put the bolts in (!) No charge.
     
  10. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
  11. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    yow, an honest dealership? :eek:
     
    Mendel Leisk and dig4dirt like this.
  12. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,799
    11,362
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    Yup.
    I even had the service manager from my preferred dealer call me back and admit he was wrong when discussing a recall. I had said it had been extended and he originally said there were no changes. After talking with his master technician, he changed his mind.
     
    jerrymildred likes this.