1. Attachments are working again! Check out this thread for more details and to report any other bugs.

WARNING NOT TO P0171 Issue solves & Warning DO NOT PURCHASE DELPHI MAP SENSOR

Discussion in 'Gen 3 Prius Technical Discussion' started by collers9640, Jan 5, 2024.

  1. collers9640

    collers9640 Junior Member

    Joined:
    Jan 14, 2017
    18
    3
    0
    Location:
    Charleston Sc
    Vehicle:
    2013 Prius
    Model:
    Three
    WARNING NOT TO PURCHASED DELPHI MAP SENSORS

    So after spending a bunch of money trying to fix my P0171 code the problem turned out to be the very first part I replaced.

    I forget the first engine code I got but it was the MAP sensor code. So I replaced the MAP sensor and then I started getting the P0171 code. So I replaced the MAP sensor again but still had the same problem. So long story short after replacing MAF (Delphi), Fuel Injectors, Air Intake, Throttle Body, MAP, EGR and Cooler the problem was the garbage Delphi MAP sensor. They claim it is for the Prius but it doesn’t fully seat which caused a vacuum leak and sent me chasing ghosts..
    So just to get the work out do not by a Delphi MaP get a Denso from Toyota
     
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,902
    16,209
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    In general, there isn't a "MAP sensor code" or a "MAF sensor code" or a whatever thing code.

    There are codes whose fortune cookies have those names in them. But what the codes mean is a certain detection condition was met (the exact condition for each code is in the repair manual), and it is up to a human to work out why that was. Sometimes the problem will be the sensor, sometimes the wiring, sometimes something else.

    Treating any code as if it just means to go replace whatever thing its fortune cookie mentions is a good way to make boat payments for the part sellers.