1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Variable back pressure exhaust

Discussion in 'Gen 3 Prius Main Forum' started by HTMLSpinnr, Apr 30, 2009.

  1. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,341
    920
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Just one more way the new 2010 Prius improves on efficiency... the new 2010 Prius muffler has a spring loaded bypass valve to improve performance at various speeds.

    For low power operation, the valve flap remains closed guiding exhaust gases through an additional chamber for quieter operation. However, during mid to higher power (flow) operation, the valve progressively opens to bypass one of the chambers for substantially lower back pressure and improved performance.


    [​IMG]


    *1 - Exhaust Gas
    *2 - Control Valve Closed
    *3 - Control Valve Open
    *4 - Low Engine Speed
    *5 - Middle to High Engine Speed

    Yet another tidbit from the 2010 NCF Guide.
     

    Attached Files:

    #1 HTMLSpinnr, Apr 30, 2009
    1 person likes this.
  2. efusco

    efusco Moderator Emeritus
    Staff Member

    Joined:
    Nov 26, 2003
    19,891
    1,193
    9
    Location:
    Nixa, MO
    Vehicle:
    2004 Prius
    Model:
    N/A
    Wow! very elegant.
     
    #2 efusco, Apr 30, 2009
  3. cwerdna

    cwerdna Senior Member

    Joined:
    Sep 4, 2005
    12,544
    2,123
    1
    Location:
    SF Bay Area, CA
    Vehicle:
    2006 Prius
    Interesting... My former 2002 Nissan Maxima had something like that as well. Looking at some FAQs, it looks like they started doing that in the 2000 model year.
     
    #3 cwerdna, May 1, 2009
  4. bedrock8x

    bedrock8x Senior Member

    Joined:
    Jul 8, 2008
    1,483
    137
    0
    Location:
    California
    Vehicle:
    Other Hybrid
    This exhaust system already used in the Camry Hybrid since 07.
    This is another improvement carried over from the TCH and so is the PSD.

     
    #4 bedrock8x, May 1, 2009
  5. PriusLewis

    PriusLewis Management Scientist

    Joined:
    Feb 25, 2009
    1,002
    84
    7
    Location:
    Denver Metro
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    The one in the Corvette is a costly option, has servos and is controlled by the computer. Prius uses a spring to accomplish the same thing. Way to go, Toyota!

    Now to figure out how to put a cable on it to make it louder when cruising through the local Sonic :scared:
     
    #5 PriusLewis, May 1, 2009
  6. EZW1

    EZW1 Active Member

    Joined:
    Aug 20, 2008
    722
    80
    7
    Location:
    Phoenix, AZ
    Vehicle:
    2016 Prius v wagon
    Model:
    Four Touring
    I concur: way to go Toyota!

    But I have one reservation: Inside the muffler this spring will be exposed to many harsh enivornments:
    a. High temps
    b. Water (byproduct of combustion and often seen dripping from a tailpipe until the exhause system is hot enough to turn it into steam)
    c. Water vapor
    d. Combustion byproducts like sulfur, and other chemical compounds
    e. Hydrocarbons that are not burned in the CAT

    All of these will lead to a spring failure. Now the real question is: will the spring last the life of the muffler or die sooner?
     
    #6 EZW1, May 1, 2009
  7. Paradox

    Paradox Prius Enthusiast / Moderator
    Staff Member

    Joined:
    Sep 22, 2005
    29,110
    8,591
    201
    Location:
    USA
    Vehicle:
    2014 Prius v wagon
    Model:
    Five
    I am sure this wouldn't matter at all but would it have made a little more sense for the 'hinge' on the valve to be on the other side? Then the exhaust gas would have been guided in the proper direction. Also, the exhaust going around the other way would not hit the 'partial roadblock' created by the valve as shown in the diagram.
     
    #7 Paradox, May 1, 2009
  8. PriusLewis

    PriusLewis Management Scientist

    Joined:
    Feb 25, 2009
    1,002
    84
    7
    Location:
    Denver Metro
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Around 1970 Pontiac offered a vacuum-powered manually controlled variable exhaust on the GTO. This is a very rare and little known option (search Youtube for GTO superbowl commercial - I can't here at work or I'd provide a link- it was advertised exactly once). The control system outlived the mufflers, and this was back in the days of no cats and leaded fuel (which was much dirtier on the muffler internals).
     
    #8 PriusLewis, May 1, 2009
  9. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,341
    920
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Keep in mind the muffler is a cylindrical chamber, and this pipe and valve assembly is likely in the center.
     
    #9 HTMLSpinnr, May 1, 2009
(You must log in or sign up to post here.)