1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Upgrading stock Radio Unit with an Alpine Unit

Discussion in 'Gen 2 Prius Audio and Electronics' started by Miguel Olivares, Oct 9, 2016.

  1. Miguel Olivares

    Miguel Olivares Junior Member

    Joined:
    Apr 7, 2016
    56
    4
    0
    Location:
    Oakland
    Vehicle:
    2008 Prius
    Model:
    Five
    I just purchased an alpine car stereo and am considering installing it on my 2005 base unit prius.

    Question 1) will I be able to use the steering wheel buttons to control and change the music?
    2) will anything else be messed up if I replace the stereo? ( temperature buttons not working..)

    3) if so, what can I do so in the end, I have an alpine stereo in my base unit prius with all of the steering buttons working?
     
  2. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    since you have a base model, all you really need is a metra axxess interface for the steering wheel buttons and an adapter harness from scosche which has a 68 ohm resistor made into it. I would contact crutchfield for the correct parts.
     
  3. Tomek310

    Tomek310 Junior Member

    Joined:
    Sep 10, 2016
    89
    9
    0
    Location:
    Riverside
    Vehicle:
    2006 Prius
    Model:
    N/A
    Spoke with Crutchfield and it seems you'd need about $150, not counting the radio.
     
  4. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    that seems a bit steep. you might try ebay or amazon for a better deal.
     
  5. Tomek310

    Tomek310 Junior Member

    Joined:
    Sep 10, 2016
    89
    9
    0
    Location:
    Riverside
    Vehicle:
    2006 Prius
    Model:
    N/A
    I bought the PAC TATO and PAC SW interface for $20 off ebay. What do you think about these? What trim kit do I need?
     
  6. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    the one I got was scosche kit from ebay. it had the bezel and adapter harness w/ 68 ohm resistor installed.
     
  7. Tomek310

    Tomek310 Junior Member

    Joined:
    Sep 10, 2016
    89
    9
    0
    Location:
    Riverside
    Vehicle:
    2006 Prius
    Model:
    N/A
    What is the resistor needed for? And how do you install it?

    Posted via the PriusChat mobile app.
     
  8. Rocket Man

    Rocket Man Junior Member

    Joined:
    May 15, 2008
    37
    2
    0
    Location:
    Denver
    Vehicle:
    2005 Prius
    Model:
    Four
    The resistor is needed to terminate a data bus. Since its included as part of the adapter harness, you won't need to do anything additional for everything to work correctly.
     
  9. Tomek310

    Tomek310 Junior Member

    Joined:
    Sep 10, 2016
    89
    9
    0
    Location:
    Riverside
    Vehicle:
    2006 Prius
    Model:
    N/A
    You mean it's included in the PAC TATO?

    Posted via the PriusChat mobile app.
     
  10. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    the 68 ohm resistor probably isn't included with the tato, you need to check the instructions to see if it is. if it ain't, do a forum search to find out how to install it yourself, or buy the scosche adapter harness from ebay.