1. Attachments are working again! Check out this thread for more details and to report any other bugs.

u shaped pcv out hose 3/8 id but size into air?

Discussion in 'Gen 3 Prius Main Forum' started by thewirm, Apr 10, 2023.

  1. thewirm

    thewirm Junior Member

    Joined:
    Apr 5, 2023
    7
    1
    0
    Location:
    wis
    Vehicle:
    2010 Prius
    Model:
    III
    Just so i have it right.
    The pcv out hose is 3/8 ID ,but this u shaped hose connects to air intake with a (5/8 id?) hose connection.
    Thus making a catch can out hose to this a 5/8 fitting ,5/8 hose from catch can.
    thanks
     
    #1 thewirm, Apr 10, 2023
    Mendel Leisk likes this.
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,709
    39,248
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    A lot of people just cut that hose at middle, leave the ends connected (at PCV valve and intake manifold), and push 3/8 barb splices at cut ends for connection to 3/8” ID fuel lines to OCC. more info in first link in my signature (link to mother of all OCC threads). If you’re on a phone turn it landscape to see signatures.

    replacement PCV hose is cheap and readily available from dealership, if you need to restore to stock.

    my setup attached:
     

    Attached Files:

    #2 Mendel Leisk, Apr 10, 2023
(You must log in or sign up to post here.)