Toyota Fielder 2013 - Cruise Control Installation

I've fitted the cruise control stick to my Toyota Fielder 2013 and the cruise control isn't working - I see there is no wire on pin 22 on plug G58 on my ECU. So I'll need to hookup a wire like the Rostra guide (which is written for the prius C) (PDF attached below). I've got a wiring kit coming in the mail.

My question is, can anyone confirm this is compatible with the 2013 Fielder? It runs the 1NZ-FXE engine, same as the Prius C, so if it's like the prius C, I should be able to insert the cable on pin 22 on connector G58 (see page 6). Surely the connector is the same and correct? What if I get it wrong? How robust are these ECU's?

Can anyone confirm this?

Thanks.

 

Well, I just went ahead and hooked er up as per above, double checked all pins are fully inserted and it doesn't work. Took it up to 60kmph to test, (37mph) but won't work.

 

Mirza, thank you! I've since scoured the internet far and wide, many YouTube videos, and started browsing japanese websites with the aid of Google translate. I wasn't able to find the information I needed. Two guys claimed to have the info, but wanted me to pay 150USD to have it and I said no.

Thank you, I will try this out later and report back. Cheers!

 

Anyone know where to get an extra pin for the ECU brake connection? Can't find them anywhere except in whole cruise control kits and I'd rather not purchase the whole kit just for the pin.