1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Tire Change / Jacking - falling off the jack

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by RickJ, Oct 9, 2006.

  1. RickJ

    RickJ New Member

    Joined:
    Feb 8, 2006
    8
    0
    0
    Location:
    No California
    Vehicle:
    2003 Prius
    I found a flat tire on my 2003 Prius this morning...
    .
    Pulled out the manual (quick glance to find the location of the spare, jack, tools, and jack - points), moved everything out of the trunk to the backseat...and set the parking brake
    .
    and proceeded to jack up the car - it rolled backwards off the jack, scaring me a bit. I did it again, and it did it again......
    .
    I looked again at the manual and it's very specific about blocking the opposite diaganol side wheel - apparently the parking brake is not sufficient to hold the car still - blocking the opposite diagonal wheel, the jacking and changing of the tire was ok.
    .
    2 learnings:
    .
    1. BLOCK the OPPOSITE DIAGONAL WHEEL
    2. RTFM
    .
    (btw - I searched to see if this was posted somewhere and didn't find it - if I missed it, sorry for the repeat...)
    .
    RickJ
     
  2. Soylent

    Soylent The v isn't a station wagon! It's just big boned

    Joined:
    May 2, 2006
    443
    11
    3
    Location:
    Fort Lauderdale, Florida
    Vehicle:
    2013 Prius v wagon
    Model:
    Three
    What did you block it with?
     
  3. Frank Hudon

    Frank Hudon Senior Member

    Joined:
    Jan 11, 2004
    4,147
    19
    0
    lots of automotive parts stores sell small folding wheel chocks. Fold flat to store and when you move the center part up it forms an inverted V that you set behind or in front of the wheel to stop it from moving. You can also make wheel chocks from a short piece of 2x4 and screw a foot long piece of belting to the bottom of it and set it behind or in front of the wheel to be chocked and back up till the tire is on the belting and against the 2x4. Or get a rock out of the ditch :rolleyes:
     
    Mendel Leisk likes this.
  4. RickJ

    RickJ New Member

    Joined:
    Feb 8, 2006
    8
    0
    0
    Location:
    No California
    Vehicle:
    2003 Prius
    a rock, maybe 2-3" thick....then all was well....

    <div class='quotetop'>QUOTE(Soylent @ Oct 9 2006, 10:56 AM) [snapback]330107[/snapback]</div>
     
  5. Soylent

    Soylent The v isn't a station wagon! It's just big boned

    Joined:
    May 2, 2006
    443
    11
    3
    Location:
    Fort Lauderdale, Florida
    Vehicle:
    2013 Prius v wagon
    Model:
    Three
    <div class='quotetop'>QUOTE(RickJ @ Oct 9 2006, 05:07 PM) [snapback]330222[/snapback]</div>
    I'm just curious cause down here there are no natural rocks just laying around. Unless I could find some roadkill, or leftover parts from a recent car accident, I'd be in some trouble. They should have included a wheel chock in the trunk.
     
  6. Jerry Kasner

    Jerry Kasner New Member

    Joined:
    Feb 9, 2014
    3
    0
    0
    Vehicle:
    2007 Prius
    Model:
    One
    I had the same thing happen, now I can not get the jack under the car to jack it up, any ideas on what to do ?
     
  7. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Surprised the wheel wasn't fused to the hub. Alot of posts about that.
     
  8. Jerry Kasner

    Jerry Kasner New Member

    Joined:
    Feb 9, 2014
    3
    0
    0
    Vehicle:
    2007 Prius
    Model:
    One
    I had tire off at the time, emergency brake was on, did not help. guess I will have to call AAA or someone like that. I need about two inches and I can get the jack under the car.
     
  9. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
  10. uart

    uart Senior Member

    Joined:
    Sep 7, 2009
    4,215
    1,202
    0
    Location:
    Australia
    Vehicle:
    2005 Prius
    Hi Jerry. Do you have another car from which you can borrow the jack? Usually you can get a second jack under the same side of the car and midway between the wheels* and lift it just a few inches there to give clearance at the original jack point.

    * Note that this is not a strengthened jack point, so place a piece of soft wood between jack and car and only lift it the few inches you need to get the required clearance.

    Failing that, the usual procedure is to get about an 8' piece of lumber or post (or cut down a small tree etc) and use brute force to lever it up.

    BTW. Referring to the now very old opening post. Every car I've ever owned has specified firmly choking the diag opposite wheel when jacking. This thread is a very good reminder why you should never get under a car supported solely by a jack.
     
  11. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,682
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    It'd be nice to see the manufacturers include a pair of wheel chocks. At least Toyota mentions chocking in the manual, which motivated me to pick a lightweight pair and stow in the under-floor tray.