1. Attachments are working again! Check out this thread for more details and to report any other bugs.

swapping nav and HID's from one prius to another

Discussion in 'Gen 2 Prius Audio and Electronics' started by george1332, Aug 12, 2007.

  1. george1332

    george1332 New Member

    Joined:
    May 26, 2006
    7
    1
    0
    Help! Has anyone out there ever swapped a Nav system and or HID's from one prius to another? I looked at the online manual and HID's lights looked like it wouldn't be too hard except for the headlamp leveling ECU assy which is buried behind the ECM (engine control module ). Does anyone know if the cable harness to the ECU is on a prius without HID's. It doesn't look like the non-nav prius has the cable harness for the nav unit under the seat, so I was wondering if it is difficult to remove the harness and swap it. Any help would be appreciated. Thanks
     
    #1 george1332, Aug 12, 2007
  2. Vagabond

    Vagabond Active Member

    Joined:
    Nov 21, 2005
    1,198
    1
    0
    Location:
    Southern California
    Vehicle:
    2012 Prius
    Model:
    Two
    <div class='quotetop'>QUOTE(roadbkr @ Aug 11 2007, 10:28 PM) [snapback]494224[/snapback]</div>

    It's very possible but it's a pain to run all that wire. Given the costs of a used MFD and that you'll need a new harness wire, it may actually be cheeper to buy a used Prius with those options instead.
     
    #2 Vagabond, Aug 12, 2007
(You must log in or sign up to post here.)