1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Superseded rear brakes 2013 prius V?

Discussion in 'Prius v Technical Discussion' started by davran, Mar 2, 2021.

  1. davran

    davran Member

    Joined:
    Mar 21, 2019
    99
    97
    0
    Location:
    BC, Canada
    Vehicle:
    2019 Prius
    Model:
    Base AWD-e
    Hello all,

    I just got a second Prius (a '13 V), and dealer said it needs rear brakes.

    I've read that the V brakes of '12 - '13 had problems and were subsequently improved. One article says that Lexus CT200h rear brakes are the fix; is this true?

    If there's a superseded rear brakes part# for the early Vs I can't find it.

    Thanks, David.
     
    #1 davran, Mar 2, 2021
    Last edited: Mar 2, 2021
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,487
    5,054
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    The brake master cylinder and pump have problems and cost $2200 to replace at a dealer if the special customer support program does not cover them. My rear brakes are original at 250,000. They only suffer from driver habits occasionally.
     
    #2 rjparker, Mar 2, 2021
  3. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,268
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    See Toyota bulletin T-SB-0081-13 Rev2, “Rear Brake Groan or Squeak Noise when Cold” (PDF), January 28, 2014.

    This has been discussed in many PriusChat threads; search for T-SB-0081-13.
     
    #3 Elektroingenieur, Mar 2, 2021
    vvillovv and davran like this.
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,666
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I know on reg Prius they just beveled the corners of the pads a bit more, reducing the when-new contact area. Not sure how effective that would be. And it would accelerate wear I think.

    Talk to dealership parts dept person; see what they say.

    How many mm have they got now, btw?
     
    #4 Mendel Leisk, Mar 2, 2021
    davran likes this.
  5. davran

    davran Member

    Joined:
    Mar 21, 2019
    99
    97
    0
    Location:
    BC, Canada
    Vehicle:
    2019 Prius
    Model:
    Base AWD-e
    I pulled apart the V's rear brakes this morning, and I didn't realize they're a top-hat design for the parking brake.

    Like the fronts I pushed back the caliper pistons, lubed the sliders, and for the rears I adjusted the parking brake.

    All done, and no brake noise so far :) I forgot to deglaze the pads, so they might be coming apart again in awhile.
     
    #5 davran, Mar 2, 2021
    Tim Jones and vvillovv like this.
(You must log in or sign up to post here.)