1. Attachments are working again! Check out this thread for more details and to report any other bugs.

steering control to buttons illumination relation

Discussion in 'Prius c Accessories and Modifications' started by Legogo, May 26, 2021.

  1. Legogo

    Legogo Junior Member

    Joined:
    Sep 1, 2019
    45
    2
    0
    Location:
    Azerbaijan
    Vehicle:
    2012 Prius c
    Model:
    N/A
    gents, I've installed aftermarket radio Alpine ute92bt and it has additional three wires for steering control.
    1st wire is REMO1
    2nd wire is REMO2
    3rd wire is SWRC G. OUT
    I connected remo 1 and 2 to appropriate pins and the 3rd black ground wire was connected to all other ground harness.

    all is working, till I turn the lights ON.
    when the buttons on steering wheel become illuminated, their resistance is changing therefore no response for illuminated buttons. interesting that the volume buttons remain working but UP DOWN MODE dies.

    I checked the pinout for G78 socket and couldn't find any grounding pin which is concerned to the steering control.

    pls advice how to resolve this issue
     
    #1 Legogo, May 26, 2021
(You must log in or sign up to post here.)