1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Some Scangauge X-gauges are not working

Discussion in 'Gen 4 Prius Main Forum' started by roadwarrior28, Feb 14, 2021.

  1. roadwarrior28

    roadwarrior28 Member

    Joined:
    Jul 7, 2016
    68
    69
    1
    Location:
    Portland, OR
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    I purchased a Scangauge II with software version 4.53 primarily to monitor temperatures as I do a lot of high load driving. I was able to program in most of the X-gauges specific to the GenIV Prius that were listed on the Scangauge website. The following gauges I couldn't get to work, they don't display any data:

    Hybrid Battery Temperature 1 (°F)
    TXD 07D2225018
    RXF C56200000000
    RXD 3810
    MTH 000703E8FFC6

    Hybrid Battery Temperature 2 (°F)
    TXD 07D2225018
    RXF C56200000000
    RXD 4808
    MTH 00FF00400000

    Hybrid Battery Temperature 3 (°F)
    TXD 07D2225018
    RXF C32100000000
    RXD 2010
    MTH 000703E8FFC6

    Hybrid Battery 1 Fan (%)
    TXD 07D2225002
    RXF C46280000000
    RXD 3808
    MTH 000500010000

    Generator Inverter Temperature (°F)
    TXD 07DF2210C1
    RXF C462051036C1
    RXD 3008
    MTH 00090005FFD8


    Perhaps there is a small error with one of the numbers, I know the scangauge site is not always 100% accurate. For reference, the car is a 2016 model with the Li-ion battery. Thanks in advance.
     
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I notice that three of those have the same TXD; the values are packed together into the response for a single PID.

    Before a certain ScanGauge version, you couldn't have more than one such value selected for display at the same time, or they'd be blank. I don't remember what firmware version fixed that.