1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Sokie Tech Hood Damper

Discussion in 'Gen 3 Prius Accessories and Modifications' started by markdjr, Mar 29, 2013.

Page 1 of 3
  1. markdjr

    markdjr Junior Member

    Joined:
    Feb 24, 2013
    11
    1
    0
    Vehicle:
    2010 Prius
    Model:
    IV
    Just wanted to confirm that those who installed this kit did not use the supplied washers and bolts. I checked a couple of pics on here and it looks like everyone used factory hardware, which I did too, but want to make sure that I didn't overlook something. Thanks.
     
    #1 markdjr, Mar 29, 2013
  2. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Ur good. I just used the factory bolts on the brackets
     
    #2 sfv41901, Mar 29, 2013
    Burna J likes this.
  3. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    is the install fairly easy ?

    just received mine today :)
     
    #3 ucsmfu, May 22, 2013
  4. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    The install is very easy. Took me less than 10 mins.

    Just beware, if you installed a STB, grind down the STB bracket with a metal file. Otherwise it hit the hood damper.
     
    #4 ePrius, May 22, 2013
  5. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    does it need to be filed down with the Cusco strut tower bar too ? I noticed that you have the tanabe one ?

    thanks
     
    #5 ucsmfu, May 22, 2013
  6. peterjmc

    peterjmc Ping pong in Ding Dang...

    Joined:
    Dec 5, 2010
    917
    189
    0
    Location:
    Clarksburg, MD
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    I feel as though this will most likely only be an issue for the Tanabe STB and not the Cusco. The Tanabe STB follows close to the edge of the fender.
     
    #6 peterjmc, May 22, 2013
  7. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    thanks I just wanted to confirm that before installing :)
     
    #7 ucsmfu, May 22, 2013
    Burna J likes this.
  8. peterjmc

    peterjmc Ping pong in Ding Dang...

    Joined:
    Dec 5, 2010
    917
    189
    0
    Location:
    Clarksburg, MD
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    I can't confirm for certain since I don't have them... :)
    But from my mental comparison in the way the Cusco and Tanabe STBs fit in the engine bay, and the install pics of the damper in the thread below... I can only assume you would be without clearance issues between the Soooooookies and the Cusco.

    Sokie Tech Hood Dampers | PriusChat

    [​IMG]
     
    #8 peterjmc, May 22, 2013
    ucsmfu likes this.
  9. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    awesome, thanks !!!

    btw, for those interested in the dampers, I suggest you to msg the seller directly for better prices :)
     
    #9 ucsmfu, May 22, 2013
  10. Burna J

    Burna J Knot Right Performance....

    Joined:
    Sep 18, 2012
    1,065
    3,335
    53
    Location:
    Long Beach, CA.
    Vehicle:
    2012 Prius
    Model:
    Three


    Can you use them with your carbon fiber hood?
     
    #10 Burna J, May 22, 2013
  11. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    they don't recommend it...... but I'm using it on my CF hood... just need to be gentle in opening and closing the hood.....
     
    #11 bino, May 22, 2013
    Burna J likes this.
  12. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    haha, yeah, i'm scared to crack to chip it.

    BTW, Bino, how are you maintaining the carbon fiber hood ? wax ?
     
    #12 ucsmfu, May 22, 2013
  13. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    same thing on how I take care of the paint.... wash.. wax....
     
    #13 bino, May 23, 2013
  14. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    Do u know if our hood is uv protected ?
     
    #14 ucsmfu, May 23, 2013
  15. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I believe there's a clear coat on it.... my hood hasn't faded yet... I have it for 3 yrs already and the car is parked under the sun the whole day......
     
    #15 bino, May 23, 2013
    ucsmfu likes this.
  16. Seanzky

    Seanzky Member

    Joined:
    Apr 5, 2014
    150
    28
    0
    Location:
    NY
    Vehicle:
    2014 Prius
    Model:
    Three
    Just to let everyone know with '14 Prius that the installation requires a lot of trimming on the right side. I had to Dremel a bunch of plastic as the damper would sit on top of them causing the hood to not close flush on the right side. The right bracket also needed Dremel-ing so it doesn't push into one of the covers.

    I'll provide pictures or a video tomorrow if anyone is interested.
     
    #16 Seanzky, Apr 13, 2014
  17. Burna J

    Burna J Knot Right Performance....

    Joined:
    Sep 18, 2012
    1,065
    3,335
    53
    Location:
    Long Beach, CA.
    Vehicle:
    2012 Prius
    Model:
    Three

    I would like to see some pictures. :confused:

    Did your kit look like this?

    [​IMG]
    [​IMG]
     
    #17 Burna J, Apr 13, 2014
    TopRamen and sfv41901 like this.
  18. Seanzky

    Seanzky Member

    Joined:
    Apr 5, 2014
    150
    28
    0
    Location:
    NY
    Vehicle:
    2014 Prius
    Model:
    Three
    Yup, same brand from eBay. Just looking at your pics, my 2014 looks like it has more plastic covers in that area. I'll go take pics and post them in a few.
     
    #18 Seanzky, Apr 13, 2014
  19. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    I would like to see this too.....not aware of any changes on the '14 Prii

    VS980 4G ?
     
    #19 sfv41901, Apr 13, 2014
  20. Seanzky

    Seanzky Member

    Joined:
    Apr 5, 2014
    150
    28
    0
    Location:
    NY
    Vehicle:
    2014 Prius
    Model:
    Three
    Still uploading the video. My phone was running out of battery and the recording was acting weird.

    Are there other 2014 owners here who could share their experience, too?
     
    #20 Seanzky, Apr 13, 2014
(You must log in or sign up to post here.)
Page 1 of 3