Sirius Sportster Plug N Play Question

I've got a Sirius Brix Streamer mounted there. I had the unit bolted on there rather than use tape though. I was using the FM modulation, but switched over to a tape adaptor. I'm STILL waiting for Coastal Dave's AUX-IN kit. I'm using that power port also, but I had the shop tap directly into the wires rather than use the plug. You can take a look at my album to see where my antenna is located. I've had no reception problems with it there. Good luck with your install and keep us posted!

 

I'm using an Audiovox PnP2 with the car kit.

I "mounted" the car kit using double-sided carpenter's tape onto the carpet on the hump in front of the kleenex drawer. It obstructs the drawer a bit, but I use the radio a lot more than the kleenex. This also allows me to remove the car kit when I go to Mexico a couple of times each year. I can take the radio and car kit to use in Mexico, then just re-tape it to the carpet in my Prius when I return.

I currently have the magnetic antenna placed near the usual antenna with the antenna wire running around the rear seat, under the carpet in the back seat to the front console, then under the front carpet to the radio. I use the auxiliary "cigarette lighter" for power.

 

I installed a Sirius radio made by JVC. Open the plastic drawer in front of the center console. I used double stick tape to place a small piece of 1/8" glass on the bottom of the drawer. the suction cup sticks securely to the glass. You don't see the glass and the radio can be easily removed. It is out of the way and plugs conveniently into the outlet.

 

I am having a hard time understanding this antenna mount from the pictures. How does the wire get outside? Isn't it coming out by the windshield and rearview mirror? (The framing is so tight it's hard to tell.)

And on the inside, how is the wire routed down to the unit?