1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Seat rail extension - referral in Los Angeles?

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Jasper2k, Mar 7, 2008.

  1. Jasper2k

    Jasper2k From HEMI to Prius

    Joined:
    Mar 7, 2008
    8
    0
    0
    Vehicle:
    2008 Prius
    Hi all!

    I've searched and read the posts regarding modifying the seat rails to get more rearward travel, and I need to get this done on a 2008 Pkg #5 in Los Angeles.

    Can anyone refer a shop that has done this mod for them, or a custom metal fab shop that could prototype it?

    I'm in the Burbank / Glendale area, but could travel anywhere in SoCal / Orange County to get this done.

    Recommendations please? Thank you! :)
     
  2. SLO Prius

    SLO Prius New Member

    Joined:
    Feb 10, 2008
    10
    0
    0
    Location:
    San Luis Obispo, CA
    Vehicle:
    2008 Prius
    If you find someone to do the work, please let me know how it goes. I wouldn't mind a trip down there (from San Luis Obispo) to have the rail extension for the drivers seat as well.

    Why couldn't it be as simple as a bolt-on kit? :)
     
  3. mrblaise

    mrblaise Go Lakers!!

    Joined:
    Mar 2, 2008
    2,248
    525
    19
    Location:
    Southern California
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Please keep me in the loop as well. I could use a few extra inches of leg room.
     
  4. priusguru

    priusguru New Member

    Joined:
    Mar 11, 2008
    18
    0
    0
    Location:
    Hollywood, California
    Vehicle:
    2007 Prius
    About now many inches are you looking for, I think it is doable but you may have have to sign a waiver do to safety reasons but I know it can be done
     
  5. mrblaise

    mrblaise Go Lakers!!

    Joined:
    Mar 2, 2008
    2,248
    525
    19
    Location:
    Southern California
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Just a couple. I'm 6'2" and though I fit fine in the Prius, it would be nice to stretch out just a bit more on longer drives.

     
  6. zeeman

    zeeman Member

    Joined:
    Mar 13, 2008
    211
    4
    0
    Location:
    California
    Vehicle:
    2008 Prius
    is it possible to make two adapter plates that would allow you to move seat backward?

    if done right adapter plate can work out real well and real inexpensively.
    basically, one set of adapter holes would mount to seat, other set of holes would go to the floor.
     
  7. Boo

    Boo Boola Boola Member

    Joined:
    Feb 13, 2007
    5,051
    485
    97
    Location:
    Flushing, NY
    Vehicle:
    2007 Prius
    Model:
    N/A
  8. Bobnokious

    Bobnokious New Member

    Joined:
    Apr 7, 2008
    9
    0
    0
    Location:
    Palmdale, CA
    Vehicle:
    2008 Prius
    Hi Everyone:

    I modified the seats in my wife's 04 Corolla to give me more legroom, I am 6'4". Basically, I used 1/4" by 2" mild steel, and fabricated adapters using the existing floor hole pattern. On the passenger side, I moved the seat all the way aft (rear) and marked this location the adapter so I could locate the new hole pattern. The seat bolts to this new location.

    For the driver side, I had my wife adjust the seat to her satisfaction. I located the seat on the new adapter to account for her seat adjustment. the whole project took me a couple of days, and worked out well. While sitting on the passenger seat, I can stretch completely, which is nice for long trips. On the driver side, my only complaint is the steering column does not have a telescopic feature, but can at least stretch my legs.

    All of modifications can be removed with no permanent alterations to the car. ZERO rear passenger legroom however, but I am not anticipating having rear passengers. If I do, too bad for them.

    As for the Prius, this approach cannout be used because of the floor pan configuration. The only approach I see feasible is extending the existing rails three to 6 inches. This can be accomplished two ways, First, extend the rails by splicing and welding a piece from another rail adding a doubler for reinforcement. The second alternative would be to have the rails copied but made longer. The second approach would be more expensive but ultimately less work, for me I mean, not who is doing the copying.

    I am in the process of trying to locate seat rails at a reasonble price, if anyone knows of any, please let me know. Once I get the rails, I can get a quote for their manufactor.

    Bob
     
  9. Bobnokious

    Bobnokious New Member

    Joined:
    Apr 7, 2008
    9
    0
    0
    Location:
    Palmdale, CA
    Vehicle:
    2008 Prius
    Hi Everyone:

    I modified the seats in my wife's 04 Corolla to give me more legroom, I am 6'4". Basically, I used 1/4" by 2" mild steel, and fabricated adapters using the existing floor hole pattern. On the passenger side, I moved the seat all the way aft (rear) and marked this location the adapter so I could locate the new hole pattern. The seat bolts to this new location.

    For the driver side, I had my wife adjust the seat to her satisfaction. I located the seat on the new adapter to account for her seat adjustment. the whole project took me a couple of days, and worked out well. While sitting on the passenger seat, I can stretch completely, which is nice for long trips. On the driver side, my only complaint is the steering column does not have a telescopic feature, but can at least stretch my legs.

    All of modifications can be removed with no permanent alterations to the car. ZERO rear passenger legroom however, but I am not anticipating having rear passengers. If I do, too bad for them.

    As for the Prius, this approach cannout be used because of the floor pan configuration. The only approach I see feasible is extending the existing rails three to 6 inches. This can be accomplished two ways, First, extend the rails by splicing and welding a piece from another rail adding a doubler for reinforcement. The second alternative would be to have the rails copied but made longer. The second approach would be more expensive but ultimately less work, for me I mean, not who is doing the copying.

    I am in the process of trying to locate seat rails at a reasonble price, if anyone knows of any, please let me know. Once I get the rails, I can get a quote for their manufactor. I live about 65 mile northeast of Los Angeles.

    Bob
     
  10. Bobnokious

    Bobnokious New Member

    Joined:
    Apr 7, 2008
    9
    0
    0
    Location:
    Palmdale, CA
    Vehicle:
    2008 Prius
    Hi Everyone:

    I modified the seats in my wife's 04 Corolla to give me more legroom, I am 6'4". Basically, I used 1/4" by 2" mild steel, and fabricated adapters using the existing floor hole pattern. On the passenger side, I moved the seat all the way aft (rear) and marked this location the adapter so I could locate the new hole pattern. The seat bolts to this new location.

    For the driver side, I had my wife adjust the seat to her satisfaction. I located the seat on the new adapter to account for her seat adjustment. the whole project took me a couple of days, and worked out well. While sitting on the passenger seat, I can stretch completely, which is nice for long trips. On the driver side, my only complaint is the steering column does not have a telescopic feature, but can at least stretch my legs.

    All of modifications can be removed with no permanent alterations to the car. ZERO rear passenger legroom however, but I am not anticipating having rear passengers. If I do, too bad for them.

    As for the Prius, this approach cannout be used because of the floor pan configuration. The only approach I see feasible is extending the existing rails three to 6 inches. This can be accomplished two ways, First, extend the rails by splicing and welding a piece from another rail adding a doubler for reinforcement. The second alternative would be to have the rails copied but made longer. The second approach would be more expensive but ultimately less work, for me I mean, not who is doing the copying.

    I am in the process of trying to locate seat rails at a reasonble price, if anyone knows of any, please let me know. Once I get the rails, I can get a quote for their manufactor.

    Bob
     
  11. griffycprius

    griffycprius c11prius

    Joined:
    Jul 21, 2008
    31
    4
    0
    Location:
    Laguna Beach
    Vehicle:
    2007 Prius