1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Scraping/grinding noise around wheels after first rotation

Discussion in 'Prime Care, Maintenance and Troubleshooting' started by ezrastiles, Jun 10, 2021.

Tags:
  1. ezrastiles

    ezrastiles Junior Member

    Joined:
    Oct 28, 2019
    4
    1
    0
    Location:
    Boston
    Vehicle:
    2020 Prius Prime
    Model:
    LE
    Thanks for your help everyone. I've got a 2020 Prime, bought new September 2019, with just under 9,000 miles (I live in a city so I don't drive much). Because of the pandemic I put off my 5,000 mile service (I know, I know). Today I just got my first tire rotation and oil change. Driving it out of the dealer, I noticed a faint scraping sound coming from around the wheel areas around 5-15 mph—almost like someone honing a knife. The noise isn't consistently there, and it's faint enough that I think if the gas engine were running I wouldn't even notice.

    My question is, did the dealer mess something with the wheels/brakes up that I should go back for? Or is this normal after a rotation of tires with 9,000 miles on them? Thanks again.
     
    #1 ezrastiles, Jun 10, 2021
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    try speeding up to 30mph on a quiet road, put it in neutral, and gently apply the brakes until you come to a stop. might just be some rust build up on the rotors
     
    #2 bisco, Jun 10, 2021
  3. BiomedO1

    BiomedO1 Senior Member

    Joined:
    Mar 27, 2021
    1,834
    929
    0
    Location:
    SacTown, Ca
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    That sounds like a loose under-body panel. The dealer may have missed a few plastic rivets or scraped something loose on the under-body, while coming off the lift.
    You can check by looking under the car and rotating the steering wheel all the way to the left, check the wheel wells for anything loose or rubbing - then again all the way to the right, repeat above procedure.
    If you do find something, hopefully the dealer admit to the error - rather than blame you for running over something.

    good luck....
     
    #3 BiomedO1, Jun 13, 2021
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Can you pinpoint front or rear, left or right? Or hard to tell?
     
    #4 Mendel Leisk, Jun 13, 2021
(You must log in or sign up to post here.)