1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacing the high beam bulbs?

Discussion in 'Gen 2 Prius Technical Discussion' started by saelee39, Jan 9, 2008.

  1. saelee39

    saelee39 New Member

    Joined:
    Nov 5, 2007
    23
    0
    0
    Location:
    California
    Vehicle:
    2004 Prius
    How do I replace the bulbs for the high beams? I just got done with the low beams but i can't find the high beams. Thanks....
     
    #1 saelee39, Jan 9, 2008
  2. PRIUS007

    PRIUS007 James Bond -007

    Joined:
    Jan 7, 2008
    133
    3
    0
    Location:
    Mundelein, Illinois
    Vehicle:
    2008 Prius
    I think they are a dual filament bulb, so replacing one is actually replacing both.
     
    #2 PRIUS007, Jan 9, 2008
  3. jayman

    jayman Senior Member

    Joined:
    Oct 21, 2004
    13,439
    641
    0
    Location:
    Winnipeg Manitoba
    Vehicle:
    2004 Prius
    I'm pretty sure you need a #9003 high/low bulb, same as on my FJ Cruiser. If the low beam filament burns out, you have to replace the entire bulb.

    If you carefully examine the bulb itself, you will notice it has two filaments, one for low beam and the other for high beam

    When installing, always take a clean cloth or paper towel, apply some rubbing alcohol, and clean the glass bulb before putting the bulb into the headlight. Even a fingerprint will dramatically shorten the bulb life
     
    #3 jayman, Jan 9, 2008
  4. saelee39

    saelee39 New Member

    Joined:
    Nov 5, 2007
    23
    0
    0
    Location:
    California
    Vehicle:
    2004 Prius
    Yes, I did use the 9003 for the low beams, thanks for the quick reply... I didn't know our cars use only one set of bulbs for both lights...
     
    #4 saelee39, Jan 9, 2008
(You must log in or sign up to post here.)