1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacing front springs, what is the difference between the two models?

Discussion in 'Generation 1 Prius Discussion' started by sheepe, Dec 27, 2014.

  1. sheepe

    sheepe Junior Member

    Joined:
    Mar 31, 2011
    19
    2
    0
    Location:
    Ohio?
    Vehicle:
    2001 Prius
    Model:
    N/A
    #1 sheepe, Dec 27, 2014
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV


    It's the free length in millimeters, which would affect the resulting ride height, but I'm not sure how to determine which one is best. I'm assuming your reason for replacing it is wear or damage to the original, so measuring the old one might not help. Are you planning to replace one side or both?

    Have you tried asking at a dealer and supplying your VIN?

    -Chap
     
    #2 ChapmanF, Dec 27, 2014
  3. 3prongpaul

    3prongpaul Hybrid Shop Owner, worked on 100's of Prius's

    Joined:
    Jul 18, 2010
    954
    724
    1
    Location:
    Boulder Hybids, Boulder, CO
    Vehicle:
    2006 Prius
    Model:
    N/A
    Whenever you replace front struts, be it OEM or KYB the upper and lower rubbers (where the top and bottom of the spring contact the strut) are almost always trashed. The aftermarket ones don't fit well so you should order OEM rubbers, and you may need upper strut mounts too. Dealers don't usually stock the rubbers, so plan accordingly.
     
    #3 3prongpaul, Jan 2, 2015
(You must log in or sign up to post here.)