Remote Lock Key Entry FCC ID

Discussion in 'Generation 1 Prius Discussion' started by JDirtbikerR, Nov 13, 2013.

Page 1 of 2
  1. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Hello!

    I recently purchased a 2001 Toyota Prius. I absolutely love it.

    My Prius did not come with any keyless entry FOB's, and I am looking at getting a couple. Is this even possible? If anyone has the FOBs for their 2001 Prius, will you please post the FCC ID and part number, so I can find a couple that will work? From what I have found on eBay, the FCC ID that should work is HYQ12BAN, but I want to be sure. My local dealer did not know what it was...

    Also, will a remote that has a trunk opener work with the 2001 Prius?
     
    #1 JDirtbikerR, Nov 13, 2013
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,211
    16,454
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Oh man, I'm looking at it now and it could very well be that ... right at the limit for old-guy eyes. It's made by Denso and also says (I think!) RSS-210.

    -Chap
     
    #2 ChapmanF, Nov 13, 2013
  3. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    I got two on ebay and googled the programing directions and prgrammed them myself, either I was lucky or the sellers know they will work for the vehicles they list in there ad. My priuses don't have electric trunk latches.
     
    #3 vaughnstark777, Nov 13, 2013
  4. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Hmm, I just want to be sure that I am getting the correct FOB, as there are so many available.

    Will you check the FCC ID, and post it here please? The FCC ID has to match up with the car in order for it to be programmed...

    Chap, is yours a factory Toyota FOB, or is Denso an aftermarket supplier?

    Thanks!
     
    #4 JDirtbikerR, Nov 15, 2013
  5. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    *bump*
     
    #5 JDirtbikerR, Nov 15, 2013
  6. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    #6 vaughnstark777, Nov 15, 2013
  7. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Ok, thanks to both of you for your help.

    I found one on eBay that works!

    So, to anyone with a first generation Prius (2001-2003) who is looking for a keyless entry remote, the remote you get MUST be FCC ID: HYQ12BAN

    The remote I bought is a factory Toyota remote. An aftermarket version may work, as long as it has the same FCC ID. I suggest getting a remote like the one shown here: Keyless Entry Remote Fob Clicker for 2006 Toyota Corolla With Do-It-Yourself Programming:Amazon:Automotive

    with the lock and unlock buttons on the front and the panic button on the back. Note that the actual remote for sale in the link will not work for a first generation Prius, but the style is the same.

    The information on the back of my remote is as follows:

    -FCC ID: HYQ12BAN
    -CANADA: 15511021295
    -RSS-210
    -DENSO

    If you buy a remote, get one with the FCC ID that I listed. Then, use the programming instructions that vaughnstark777 has kindly shared:

    2001 Toyota Prius - Free Keyless Remote Fob Entry programming instructions, procedures for all automotive vehicles

    I followed the instructions outlined on the above linked website, and I am happy to say that I now have a working remote!
     
    #7 JDirtbikerR, Nov 30, 2013
  8. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    And as for a remote with a trunk button, one will not do you any good, as the factory Prius did not come with the actuator for that function. I'm not sure if the remote with a window button will work or not.
     
    #8 JDirtbikerR, Nov 30, 2013
  9. kutcht1

    kutcht1 Member

    Joined:
    Nov 25, 2013
    305
    82
    0
    Location:
    Andover, Minnesota
    Vehicle:
    2008 Prius
    Model:
    N/A
    Nice work and glad you figured it out. Mine came with two non-working remotes that the previous owner gave to me. He had been using the key in the door and the cylinder had worn to where it was hard to open and one of the keys now does not work in the ignition. Only to find out he was not using the remotes cause the batteries were dead. Replaced the batteries and both work great. Talk about being lazy! Oh, went to the dealer to get a back up key only to find that they are $120 since they are chipped. I wish keys would go back to basic so one could replace them with a $5 key from Ace hardware.
    TomK
     
    #9 kutcht1, Nov 30, 2013
  10. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    I got two blank keys off ebay for $20 U. S. and had home depot cut them to match the old one (they weren't to thrilled to do it but with some coaxing they finally agreed) and if some one needs the programming instructions just google them or resond to this post and I'll get it for you as I don't have them right now.


    SCH-I605 ?
     
    #10 vaughnstark777, Nov 30, 2013
  11. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Some people! Yes, I'm glad I got it figured out as well. I'm thinking mine didn't come with remotes, as it was a state vehicle for the first part of its life.

    Great idea, Vaughn! I might get a couple to have a few backups, "just in case". To get a couple extra spares is sure a heck of a lot cheaper than having to replace the ECU, if I were ever to lose them all and get stranded!

    Just curious, does one need an existing key in order to be able to program a new one?
     
    #11 JDirtbikerR, Nov 30, 2013
  12. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    Yes, in order to program the new key you start with the existing key in the ignition.

    SCH-I605 ?
     
    #12 vaughnstark777, Nov 30, 2013
  13. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    #13 vaughnstark777, Nov 30, 2013
  14. bobofky

    bobofky Member

    Joined:
    Jun 18, 2007
    107
    10
    0

    Coastal Technology used to have a device for opening the trunk on 2001 - 2003 Pri. They also had a Cruise control kit that worked with their remote, but they discontinued it shortly after the 2002 came equipped with cruise control.
     
    #14 bobofky, Dec 2, 2013
  15. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    Coastal has discontinued everything for gen 1's

    SCH-I605 ?
     
    #15 vaughnstark777, Dec 2, 2013
  16. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    I can also confirm this unfortunate situation.
     
    #16 JDirtbikerR, Dec 3, 2013
  17. Wisco

    Wisco Member

    Joined:
    Sep 26, 2013
    116
    20
    0
    Vehicle:
    2005 Prius
    Model:
    N/A
    I'm glad I found this thread.

    I picked up two keyless entry remotes (using the FCC ID above) off ebay. I can't get the car into programming mode though, and I'm baffled. I'm normally pretty good at stuff like this but after 15+ tries it just won't work. Did anyone notice any subtle steps they missed at first?
     
    #17 Wisco, Jan 2, 2014
  18. JDirtbikerR

    JDirtbikerR Junior Member

    Joined:
    Sep 30, 2013
    65
    2
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    1. Do you have a first generation Prius? The FCC ID I listed should work for all first gens. 2004 and newer, probably not.
    2. Did you use the instructions specific to your year from this link:? Toyota>Prius - Free Keyless Remote Fob Entry programming instructions, procedures for all automotive vehicles
     
    #18 JDirtbikerR, Jan 2, 2014
  19. Wisco

    Wisco Member

    Joined:
    Sep 26, 2013
    116
    20
    0
    Vehicle:
    2005 Prius
    Model:
    N/A
    1. I can't even get the car into "programming mode" (indicated by the car toggling the locks after the series of actions). So the remotes themselves aren't an issue.

    2. Yup. I followed those instructions carefully. I found others that specified time frames for each step, but with no results. I found one set of instructions that was slightly different, but those also didn't work.

    Thanks!



    Turn off signatures in Tapatalk Tapatalk
     
    #19 Wisco, Jan 3, 2014
  20. vaughnstark777

    vaughnstark777 Member

    Joined:
    May 4, 2012
    180
    33
    0
    Location:
    Roy, WA
    Vehicle:
    2001 Prius
    Model:
    I
    Sorry friend, I have a 2001 and a 2003 and was able to, in vehicle, program both with keys from eBay. Wish I could help more.

    SCH-I605 ?
     
    #20 vaughnstark777, Jan 3, 2014
(You must log in or sign up to post here.)
Page 1 of 2