1. Attachments are working again! Check out this thread for more details and to report any other bugs.

For Sale ProClip Center Mount for Gen 3 (plus iPhone holder)

Discussion in 'Private Sales' started by iluvmacs, Jun 8, 2020.

  1. iluvmacs

    iluvmacs Member

    Joined:
    Nov 17, 2005
    280
    104
    0
    Location:
    Madison, WI, USA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Hi all! Sold my PiP a few years back but still seem to have the ProClip for it sitting around, and I figure someone here could make use of it. You can see my thread from years ago on my very clean installation here.

    Center Dash Mount | ProClip USA

    $30 new... so let’s say $20? It’s in great condition. I never even exposed the tape that you can use to make it more secure, as it seemed to work fine without it.

    I also have the phone mount for iPhone 6/6S/7/8/SE-gen2 as well as the one for iPhone 5/5C/5S/SE-gen1. These are both the type that you stick an Apple lightning cable into and it serves as a very nice dock, so you don’t have to mess with the cable every time. It’s not hard to route the cable through the dash into the armrest USB port, for a seamless look.
    Adjustable iPhone Holder for Lightning to USB Cable | ProClip USA
    Adjustable iPhone 5, SE Holder | Lightning to USB Cable | ProClip USA | ProClip USA
    These are $40 new and I would sell for $25 each. Great condition also.

    Buy the mount and an iPhone holder for $40 as a pair! All 3 pieces, $50!

    Payment via PayPal, add shipping at-cost (or local pickup if you happen to be near Madison, WI).
     
    #1 iluvmacs, Jun 8, 2020
    Last edited: Jun 8, 2020
  2. iluvmacs

    iluvmacs Member

    Joined:
    Nov 17, 2005
    280
    104
    0
    Location:
    Madison, WI, USA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    These pics show the iPhone 6/7/8 holder attached to the mount, and the iPhone 5 holder separately.
     

    Attached Files:

  3. iluvmacs

    iluvmacs Member

    Joined:
    Nov 17, 2005
    280
    104
    0
    Location:
    Madison, WI, USA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    *bump* any takers?

    I'll entertain reasonable offers, too.
     
  4. Fitcious

    Fitcious Member

    Joined:
    Feb 12, 2020
    195
    87
    0
    Location:
    Los Angeles
    Vehicle:
    2013 Prius
    Model:
    Four
    no pics on how you installed the mount and how you routed the cable?
     
  5. iluvmacs

    iluvmacs Member

    Joined:
    Nov 17, 2005
    280
    104
    0
    Location:
    Madison, WI, USA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Pics of it installed here: Smart phone mounts | Page 3 | PriusChat

    I don't have any pics of the cable routing within the panels. But basically you just pop off the trim ring around the radio (really, you just have to pull up the right side of it enough to slide the cable in), the trim piece around the shifter, and the cup holder unit pops off if you pull it straight up with enough force. That gets you a nice easy routing channel (I went around the right side of everything, IIRC). My memory is that there are no fasteners to remove, everything is just a pop-off piece.
     
  6. WoundedWalrus

    WoundedWalrus Junior Member

    Joined:
    May 28, 2016
    2
    0
    0
    Location:
    Baltimore, MD
    Vehicle:
    2012 Prius
    Model:
    Five
    I'll take the center dash mount. Please PM with the total price and payment instructions. Thanks!
     
  7. iluvmacs

    iluvmacs Member

    Joined:
    Nov 17, 2005
    280
    104
    0
    Location:
    Madison, WI, USA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    The dash mount has been sold, but the iPhone holders remain available (for now...), if anyone happens to be interested. Make me an offer.