1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius untouched in Garage for 1 year. Wet inside!

Discussion in 'Gen 3 Prius Main Forum' started by priusenvious1, Jul 29, 2021.

  1. priusenvious1

    priusenvious1 Member

    Joined:
    Oct 27, 2012
    325
    37
    0
    Location:
    LA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    Just wondering how this happened. During covid, I left both our cars in a garage side by side. 2012 Prius Plug In. 2014 Ford Escape. Didn't move it for a year. We did this because we went to live somewhere else for the year.

    When we finally went to check on the cars, Prius was humid and moldy inside. It was in bad condition in the sense that moisture got in somehow. Even spider webs and such formed inside. The Ford was completely clean inside the way it was the day we left it. Not even a spec of dust.

    Just wondering why the Prius didn't hold up as well?
     
  2. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Sounds like you have a leak somewhere and the car had the water in it before you parked it. Older Gen2 Prius have known problems with leaks, but less so with Gen3... Regardless, I'm sure getting the car detailed will solve it all and then you need to find out where the leak is.
     
    bisco and rjparker like this.
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,048
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    check the 12v, spare tire and hybrid batteries. leaks are usually cracks in the rain gutter under the plastic molding
     
    privilege likes this.
  4. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,324
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Do you mean the rain gutter around his garage?
     
  5. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,173
    4,078
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    rear side flaps between upholstery and chassis probably stuck open.
     
  6. Leadfoot J. McCoalroller

    Leadfoot J. McCoalroller Senior Member

    Joined:
    May 12, 2018
    7,427
    6,913
    1
    Location:
    Pennsylvania
    Vehicle:
    2018 Prius c
    Model:
    Two
    Probably already had a puddle in the back that wasn't noticed during frequent usage.
     
  7. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Good check-list item when mothballing a car: take everything out in back and check/clean.
     
    PriusCamper likes this.
  8. ETC(SS)

    ETC(SS) The OTHER One Percenter.....

    Joined:
    Oct 28, 2010
    7,855
    6,656
    0
    Location:
    Redneck Riviera (Gulf South)
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Well....
    I'm a hard sell on the Ford being better built, and unless your garage has a leak, you brought the water and the Prius into the garage at the same time.
    It could be anything from a batch of bad hatch seals (second post this week about leaks) to your car having been previously wrecked, to a hatch-seal deformation caused by closing it on something sticking out of the hatch.

    We get 60-70 inches of rain during an average year where I live, so hatch leaks do not go long undetected.
    I haven't seen or heard much in the way of hatch leaks for our 2010 G3's and we probably have a half dozen scattered around locally.

    So...
    Time to sell the Prius (an up optioned Pip if your siggie is correct) and drive the Ford for a while until the car market cools down somewhat, IMHO. I would also make full disclosure on the condition of the Pip and price-adjust accordingly, but the moldy interior will inform any potential buyer of the car's condition.

    If you're still in LA, and you have two cars that you parked for a full year then it might be time to re-assess your transportation needs.
    Since you obviously have a garage that you're not sub-letting when the used car market cools down you might be one of those rare people whose needs can be met with a used BEV or maybe another PHEV..

    Good Luck!
     
  9. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Just editorial: maybe hatch “ponding” is more succinct?
     
  10. mmmodem

    mmmodem Senior Taste Tester

    Joined:
    Nov 17, 2011
    2,732
    1,703
    0
    Location:
    Bay Area, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Owner of a Ford Escape and previous owner of a PiP. My guess? Just a complete and random guess here:

    The Prius like most Japanese cars allows the HVAC to be off with vents open. I seem to recall the vents automatically go to refresh after a set period on their own if you use auto climate control. Curiously, the Ford Escape and most domestic vehicles I've driven completely close the vents/goes to recirculate if you turn off the HVAC.

    So my wild guess is that the Escape vents were closed and the Prius vents were open when you mothballed the vehicles last year. With the 100% humidity where I lived, moisture could easily build up inside in the garage. I have to run a dehumidifier in the basement/walk-in garage during summer or I find puddles everywhere. The moisture more easily makes it way inside the Prius than the Escape. :whistle:
     
  11. privilege

    privilege Active Member

    Joined:
    Mar 17, 2021
    659
    169
    0
    Location:
    Birmingham
    Vehicle:
    2011 Prius
    Model:
    Three
    water in the spare tire area evaporated and helped mold get started.

    detail it and it's fine
     
  12. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,048
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    no, the molding alongside the roof edge of the car
     
  13. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I've read, with any mothballed car, you want to leave one window slightly down, maybe with rags loosely stuffed in the gap, to prevent insect incursions. And a small tub of silica gel (or salt?) is good.

    Also, regarding AC: if you've been running the AC right up to shut-down, there's invariably moisture in the system, just like a glass of ice water on a hot day. Before mothballing at least, try to run the vent system a good length of time with AC off, give the humidity a chance to disperse. This is actually good practice all the time.
     
    fuzzy1 likes this.
  14. Pdaddy

    Pdaddy Member

    Joined:
    Dec 10, 2013
    153
    49
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Make sure your AC drain line is not disconnected which can cause hard to notice pooling under the carpet.

    In any case it should be relatively easy to take out the seats and carpet and clean or replace them. Based on my years of doing PH mold investigations -- if upholstery is visibly moldy you should replace. If its only a musty odor you can clean instead of replace if you don't have mold allergies. Still need to figure out the moisture source so this problem is not repeated.

    SM-G960U ?
     
    bisco likes this.
  15. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,324
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    In my normal winter use, in a different climate zone, there is generally excess moisture already inside the car, from human respiration, wet clothing and footwear, defroster/AC systems, etc. So to avoid condensation and frost on the insides of the windows, it is important to let moisture escape. That is why I get better results with vents left open instead of closed.