1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius rack for Hang Glider

Discussion in 'Gen 2 Prius Accessories & Modifications' started by ray0825, Jul 8, 2007.

  1. ray0825

    ray0825 New Member

    Joined:
    Apr 11, 2007
    8
    0
    0
    Location:
    Fountain Inn, SC
    Vehicle:
    2006 Prius
    Although there are probably very few Hang Gliding Prius owners, the rack might be useful for other purposes so thought I would share.

    My goal was to build a rack that could be completely removed (I don't spend most of my driving miles going flying) but still hold 90 lb loads.

    I used the tow point on the front, welding a 8 in post onto the screw in fitting. It can still be unscrewed, with a 40 in. T post slipped over it and pinned. This still wanted to sway left/right so I bolted (with wingnuts) aluminum tubes in a triangular shape to the add-on purchased pole racks. About half the weight is supported on the front tow point which is plenty strong. The clip-on racks on the roof only support about 45 lbs spread over two racks.

    Seems to hold everything pretty well. My mileage went from 56 avg to 46 avg (not quite so streamlined with rack and 20 ft long glider on top).
     

    Attached Files:

    #1 ray0825, Jul 8, 2007
  2. Bill Merchant

    Bill Merchant absit invidia

    Joined:
    May 3, 2005
    4,096
    82
    13
    Location:
    USA | Oregon | Portland area | 97004 |
    Vehicle:
    2007 Prius
    Hi rayj, welcome to PriusChat and thanks for sharing! That looks like a pretty stable setup. It might be useful for a scull too. Happy driving and gliding!
     
    #2 Bill Merchant, Jul 9, 2007
  3. DavidGKano

    DavidGKano New Member

    Joined:
    Jan 31, 2011
    2
    0
    0
    Location:
    West Lebanon, NH
    Vehicle:
    2010 Prius
    Model:
    III
    Thanks for posting, I'm into hang gliding too and just purchased a 2010 Prius. It has two of those tow points, so I'm going to use them to connect my rack.

    Where did you find out the size of the threaded hole? It is recessed in enough that it will be challenging to measure. What is the size on your Prius? Maybe they are the same, even though I have a newer model.

    Thanks,
    David
     
    #3 DavidGKano, Jan 31, 2011
  4. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,324
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Don't measure the threads in the hole. Measure them on the mating eyebolt (for towing) stored on top of the spare tire.
     
    #4 fuzzy1, Feb 1, 2011
  5. tochatihu

    tochatihu Senior Member

    Joined:
    Apr 10, 2004
    9,157
    3,562
    0
    Location:
    Kunming Yunnan China
    Vehicle:
    2001 Prius
    So what kind of kites do you guys fly?

    David I used to live in Hanover. Is Peter Christian's still there?
     
    #5 tochatihu, Feb 1, 2011
  6. gerrypez

    gerrypez Junior Member

    Joined:
    Dec 16, 2009
    8
    1
    0
    Location:
    Davis, CA
    Vehicle:
    2017 Prius Prime
    Model:
    N/A
    Thanks for this post on the Prius racks for hang gliding. I have a 2010 Prius, and I was un-aware fo the front tow points. I want to design a rack that will support 3 gliders.

    I plan to use a tow hitch in the back, one rack in the middle, and these tow points in the front, to get wide support. I'll post pictures after I build it ... may take a while!
     
    #6 gerrypez, Mar 4, 2011
  7. gerrypez

    gerrypez Junior Member

    Joined:
    Dec 16, 2009
    8
    1
    0
    Location:
    Davis, CA
    Vehicle:
    2017 Prius Prime
    Model:
    N/A
    #7 gerrypez, Dec 1, 2012
    fuzzy1 likes this.
  8. wb9k

    wb9k 09 Gen II Prius w Hymotion Plug-In Batt

    Joined:
    Oct 27, 2012
    174
    99
    0
    Location:
    Commerce, MI, USA
    Vehicle:
    2009 Prius
    Model:
    N/A
    Why not mount the glider on the car fully assembled? Then the car could fly! :)
     
    #8 wb9k, Dec 2, 2012
  9. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,324
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    emphasis added:
    I would note that this solution is specific to Gen3, which has two front tow points. This thread is homed under Gen2, but the Gen2 has only a single front point.

    Since some users don't search the whole PC site, would it be useful to post a link to this thread over in the GenIII forums?
     
    #9 fuzzy1, Dec 2, 2012
(You must log in or sign up to post here.)