1. Attachments are working again! Check out this thread for more details and to report any other bugs.

PRIME SELF DIAGNOSTIC MODES

Discussion in 'Prime Technical Discussion' started by Andyprius1, Jun 27, 2018.

  1. Andyprius1

    Andyprius1 Senior Member

    Joined:
    Feb 4, 2013
    2,327
    859
    1
    Location:
    Cool CA
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Base
    Altho I know somebody posted this before, I can’t find it, I don’t think the search works very good on the new PC. so, could somebody please spell it out again. THANK YOU.
     
  2. Andyprius1

    Andyprius1 Senior Member

    Joined:
    Feb 4, 2013
    2,327
    859
    1
    Location:
    Cool CA
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Base
    Iv done this on all of my Prii, the problem is the really only usable info is the 12 V battery level. Of course my multimeters will provide this but it’s good to compare. I only remember turning lights off/on 3 times, ?????
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,129
    50,045
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    why aren't the directions in the o/m? they can be very useful.
     
  4. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,268
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    Nearly all of the ECU-controlled systems on the Prius and Prius Prime have self-diagnostic capabilities, but most require a Toyota Techstream diagnostic system, or at least an OBD II-compatible scan tool, to see anything more than a warning light or message on the multi-information display.

    I’ve posted about some exceptions, like the air conditioning system:

    Air conditioning problem on recirculation (See Post #7) | PriusChat

    and the navigation system:

    Gen 4 Prius "Maintenance" mode | PriusChat
     
    bb4srv likes this.