1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Parking Brake Recall Again, It's Real

Discussion in 'Gen 4 Prius Care, Maintenance and Troubleshooting' started by priusgto, Mar 18, 2017.

  1. priusgto

    priusgto Active Member

    Joined:
    Feb 9, 2010
    193
    227
    0
    Location:
    Northern Arizona
    Vehicle:
    2016 Prius
    Model:
    Two
    Haven't been to the dealer yet to get the recall done as I wasn't too worried about getting run over but, today I had one of the cable ends come off of the brake arm. I pulled in the garage and set the brake as I always do and thought the e-brake pedal felt a bit light and went almost to the floor. I immediately knew it had to be the recall issue so I crawled under the back of the car to confirm. I always thought that to get the cable to slip off the arm you'd have to let the brake pedal slam back up to the release position but obviously this isn't the case. Every time I've released it I always let the pedal slowly follow my foot all the way up. Anyway, it was surprisingly easy to hook the cable back over the bracket so I guess it's time to take it to the dealer for the recall.

    off.jpg
    on.jpg
     
    #1 priusgto, Mar 18, 2017
    FuelMiser, RCO, 'LectroFuel and 5 others like this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    so, it's not again, you never went?:cool:
     
    #2 bisco, Mar 18, 2017
    RCO, Tideland Prius and Prodigyplace like this.
  3. ATHiker

    ATHiker Senior Member

    Joined:
    Mar 31, 2010
    644
    560
    0
    Location:
    Massachusetts
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    Thanks for the photos.

    When I read Toyota's description of the issue and FAQ on this, I came away thinking that it was not a big deal -- because the only time you had to worry about this was if you left the car while it was running and not put in park (something I could not see myself doing).

    What your pictures make abundantly clear is far more straight forward: The defect can make the Parking Brake useless. Period.

    Not sure why Toyota did simply say that.
     
    #3 ATHiker, Mar 18, 2017
    alanclarkeau likes this.
  4. priusgto

    priusgto Active Member

    Joined:
    Feb 9, 2010
    193
    227
    0
    Location:
    Northern Arizona
    Vehicle:
    2016 Prius
    Model:
    Two
    Again as in another recall thread.

    Actually the one side still worked and kept the car from rolling but the pedal had to go much farther to engage it. So, in order for a total failure of the e-break to occur both sides would have to unhook.
     
    #4 priusgto, Mar 19, 2017
    bisco likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Most parking brake cables have some sorta T bracket, to keep the tension balanced. So if one side is kaput, the T bracket needs to skew way off before the other side gets some tension, and it's not going to be anywhere near as effective.

    Third gen, for example:

    upload_2017-3-19_7-32-13.png
     
    #5 Mendel Leisk, Mar 19, 2017
    RCO likes this.
  6. randomwalk101

    randomwalk101 DYI'er

    Joined:
    Feb 4, 2012
    532
    270
    0
    Location:
    texas
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    I had the park brake recall done awhile back. It's just a little clip that attached behind that brake cable (where the ball around part in OP's photo). Very simple and takes probably 0.5293 seconds to do. Yet I waited 3 hours for them to do it at the dealership. If I knew what it was then, I could I have just just grab a piece of wire and a pliers and twist the metal wire around that part to prevent it from coming off..That would have saved me 2 hrs 59 mins
     
    #6 randomwalk101, Mar 19, 2017
    Priifan, kithmo and RCO like this.
  7. Montgomery

    Montgomery Senior Member

    Joined:
    Sep 11, 2015
    2,254
    2,241
    2
    Location:
    Orange County, CA
    Vehicle:
    2015 Prius
    Model:
    Two
    One wonders why it was built this way. You would think testing would have shown this as a possible failure
     
    #7 Montgomery, Mar 19, 2017
    Priifan likes this.
  8. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Maybe the parking brake lever at the caliper is not always releasing properly, allowing the ball to come out?
     
    #8 Mendel Leisk, Mar 19, 2017
    RCO and Montgomery like this.
  9. kithmo

    kithmo Couch Potato

    Joined:
    Apr 25, 2010
    2,404
    2,773
    47
    Location:
    South Yorkshire, UK
    Vehicle:
    2016 Prius
    I was under the impression that the recall mod was at the other end on the foot pedal ?
     
    #9 kithmo, Mar 20, 2017
    RCO likes this.
  10. Priifan

    Priifan Member

    Joined:
    Jan 18, 2017
    93
    143
    0
    Location:
    Cary, NC
    Vehicle:
    2017 Prius
    Model:
    Four
    Is this defect just on the 2016 and not the 2017? (First time I have heard of it.)
     
    #10 Priifan, Mar 20, 2017
  11. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds right. there was a delay during '16 production to correct it, and '17's were probably fine.
     
    #11 bisco, Mar 20, 2017
    RCO likes this.
  12. Priifan

    Priifan Member

    Joined:
    Jan 18, 2017
    93
    143
    0
    Location:
    Cary, NC
    Vehicle:
    2017 Prius
    Model:
    Four
    Bisco, Thanks! Fan
     
    #12 Priifan, Mar 20, 2017
  13. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,799
    11,362
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    I believe some early 2017 were affected. I remember my local dealer with a 2017, I believe, that was waiting for recall parts to complete the sale and delivery.
     
    #13 Prodigyplace, Mar 21, 2017
    RCO likes this.
  14. ATHiker

    ATHiker Senior Member

    Joined:
    Mar 31, 2010
    644
    560
    0
    Location:
    Massachusetts
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    Here is a link with additional links to TSBs etc. : 2017 TOYOTA PRIUS 5 HB FWD | NHTSA

    Screen Shot of page one:

    IMG_3993.PNG
     
    #14 ATHiker, Mar 21, 2017
    Last edited: Mar 21, 2017
    RCO and Mendel Leisk like this.
  15. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,799
    11,362
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    #15 Prodigyplace, Mar 21, 2017
  16. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Still seems weird, that when the parking brake is released, the cable and ball is lengthening, but the lever arm is not snapping back. What is the patch, is the added clip right at the ball, to prevent it popping out.

    Here's our third gen, same setup:

    IMG_6476.JPG

    (Looking at drivers side, parking brake is applied.)
     
    #16 Mendel Leisk, Mar 21, 2017
    RCO likes this.
  17. ATHiker

    ATHiker Senior Member

    Joined:
    Mar 31, 2010
    644
    560
    0
    Location:
    Massachusetts
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    #17 ATHiker, Mar 21, 2017
    Elt31987, snipercoder, Prodigyplace and 1 other person like this.
(You must log in or sign up to post here.)