1. Attachments are working again! Check out this thread for more details and to report any other bugs.

P0A11 dc/dc converter enable circuit/open help

Discussion in 'Gen 2 Prius Technical Discussion' started by Van Baggett, Dec 14, 2014.

  1. Van Baggett

    Van Baggett Junior Member

    Joined:
    Dec 14, 2014
    9
    0
    0
    Vehicle:
    2011 Prius
    Model:
    II
    Has anyone had this error code and know how to resolve it? Is this a battery issue? Converter?

    Thanks

    Van
     
    #1 Van Baggett, Dec 14, 2014
  2. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,917
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    Hello Van, welcome to PC.
    I have no experience of this code, but I would think the first place to check is the 5 amp fuse at the 12 volt battery terminal block (covered by the red plastic shield). Also check the small white wire with connector is plugged into the connector block, and that the wire is not damaged. This wire, and fuse feeds the 12 volt battery charge level information to the DC/DC converter.

    John (Britprius)
     
    #2 Britprius, Dec 14, 2014
    Last edited: Dec 14, 2014
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    I do not believe P0A11 is a valid Prius DTC. P0A10 would point to a failed DC/DC converter within the inverter.
     
    #3 Patrick Wong, Dec 14, 2014
  4. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,379
    3,238
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    I'd want a bit more background.
    How did they confirm this code?
    What are the current symptoms?

    What were the conditions and symptoms prior to this?
     
    #4 ericbecky, Dec 15, 2014
  5. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    POA1's are all Hybrid Powertrain Control Module nags.

    Was the car in a front end collision?
     
    #5 edthefox5, Dec 16, 2014
  6. Jeremiah216

    Jeremiah216 New Member

    Joined:
    Jul 7, 2019
    6
    0
    0
    Location:
    Cleveland Ohio
    Vehicle:
    2004 Prius
    Model:
    Base
    Hi did you figure out the problem? I'm having the same problem as well

    Posted via the PriusChat mobile app.
     
    #6 Jeremiah216, Jul 13, 2019
(You must log in or sign up to post here.)