1. Attachments are working again! Check out this thread for more details and to report any other bugs.

P CON MAIN wiring

Discussion in 'Gen 2 Prius Technical Discussion' started by Jimlarge, May 4, 2024.

  1. Jimlarge

    Jimlarge Junior Member

    Joined:
    Nov 24, 2016
    28
    1
    0
    Location:
    MN
    Vehicle:
    2008 Prius
    Model:
    N/A
    My 2007 has a damaged corroded wire in the fuse box under the hood.
    It is causing the screen to have a park lock error.
    I have attached the photos of the problem.

    Does anyone know where this wire goes and comes from? I will have to tie into the wire somewhere else because the big group of wires going into/out of the fuse box seems very difficult to work with. I'm also concerned about damaging more wires if I start taking that big bunch of wires apart so I'd like to"hook up with thewire somewhere else.

    I really appreciate any help!
    Thanks!
     

    Attached Files:

    #1 Jimlarge, May 4, 2024
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,763
    16,111
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    #2 ChapmanF, May 4, 2024
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,152
    1,750
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    You can jumper that out The blue wire in the bottom picture in that plug You pick up the 7.5 amp fuse down in the fuse box for p con. And that livens that circuit back up You should clean the crap out of that hole and see what you really have once cleaned with some good contact cleaner It may be okay and then you need to lube it up when you put it back together
     
    #3 Tombukt2, May 4, 2024
(You must log in or sign up to post here.)