1. Attachments are working again! Check out this thread for more details and to report any other bugs.

OBD Plug

Discussion in 'Gen 2 Prius Technical Discussion' started by buzzard bill, Dec 8, 2006.

  1. buzzard bill

    buzzard bill New Member

    Joined:
    May 15, 2006
    23
    0
    0
    Location:
    Escanaba, MI
    Vehicle:
    2005 Prius
    I can't find the OBD plug on my 2005 Prius. On all my other cars it was located on the bottom of the steering colum. I want to hook up a scangauge. Can the scangauge be hooked up to run continuously?

    Thanks,
    Bill
     
    #1 buzzard bill, Dec 8, 2006
  2. Georgerl

    Georgerl New Member

    Joined:
    Sep 7, 2006
    4
    0
    0
    <div class='quotetop'>QUOTE(buzzard bill @ Dec 8 2006, 07:37 AM) [snapback]359233[/snapback]</div>
    I believe it is the same place as my '06, between the steering collumn and the display console just back of where the dash wraps under.

    Yes you can leave the Scangauge plugged in all the time, mine is on my Prius and my F250 4X4. Be sure to set the scangauge engine to 'hybrid' or it wil shut off when the engine shuts off. The scangauge will power itself down a few seconds after you shut off the car.

    Works great, can hardly wait 'til the USB mod is available for the scangauge to enable other hybrid items to be displayed.

    Good Luck!

    Tigerman

    My "FAST" car is a Sunbeam Tiger!
     
    #2 Georgerl, Dec 8, 2006
  3. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    If you're sitting in the seat with your foot near the accelerator,
    the plug is over your right shin. Which gets in the way a little
    bit if you're driving around with an OBDII dongle in there! ...
    .
    _H*
     
    #3 hobbit, Dec 8, 2006
  4. buzzard bill

    buzzard bill New Member

    Joined:
    May 15, 2006
    23
    0
    0
    Location:
    Escanaba, MI
    Vehicle:
    2005 Prius
    Thanks for the information.

    Bill
     
    #4 buzzard bill, Dec 9, 2006
  5. Lorevalles

    Lorevalles Junior Member

    Joined:
    Jun 20, 2023
    2
    0
    0
    Location:
    Colmenar Viejo, Spain
    Vehicle:
    2006 Prius
    Model:
    II
    Estoy modificando mi Prius segunda generación y necesitaría saber si alguien más ha conseguido hacer un hibrido enchufable.
    Lo último que he implementado es un Arduino Nano, para indicar al Prius, es el estado de la carga de la batería EV.
    Estoy buscando los códigos hexadecimales, por ingeniería inversa. Existe esa información en algún sitio? Es toy loco buscando y no la encuentro. Puedes ayudarme?.
    [​IMG]
     
    #5 Lorevalles, Jun 20, 2023
(You must log in or sign up to post here.)