1. Attachments are working again! Check out this thread for more details and to report any other bugs.

No acceleration No Power Problem

Discussion in 'Gen 2 Prius Technical Discussion' started by weste123, Dec 29, 2011.

  1. weste123

    weste123 New Member

    Joined:
    Dec 29, 2011
    3
    2
    0
    Location:
    Minnesota
    Vehicle:
    2008 Prius
    Model:
    Two
    I took my 2008 Prius in for a routine oil change today. Everything went as planned, the shop where I had brought it took care of things and backed the vehicle out no problem.

    When I went to go home, about 30seconds into driving the warning lights all lit up and the car seemed to lose all power. I ended up with the accelerator pedal pressed to the floor but at a dead stop.

    Obviously I went back into the shop and they are looking into it. So far though they have been unable to identify what went wrong.

    Has anyone heard of something like this happening or have any idea whats going on?
     
    #1 weste123, Dec 29, 2011
    LexRoy likes this.
  2. jamessicat408

    jamessicat408 Active Member

    Joined:
    Nov 16, 2011
    110
    175
    0
    Location:
    San Jose, CA
    Vehicle:
    2011 Prius
    Model:
    Two
    If they only did an oil change on it, could it be that they used the wrong oil number or drowned the engine?
     
    #2 jamessicat408, Dec 29, 2011
  3. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Did you run out of gas?
     
    #3 firepa63, Dec 29, 2011
  4. richard schumacher

    richard schumacher shortbus driver

    Joined:
    Mar 27, 2004
    7,663
    1,041
    0
    Location:
    United States
    Vehicle:
    2004 Prius
    Model:
    N/A
    Yes, we have, and if the problem is not lack of fuel it can be ugly... Always, always, always: check the oil level yourself before driving away from every oil change, no matter who changes it. You can find some gruesome errors that way before they become expensive, and at the very least if there is a problem afterwards it lets you rule out a common set of causes.

    Let us know what trouble codes a Toyota dealer finds.
     
    #4 richard schumacher, Dec 29, 2011
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds like a very simple problem, probably knocked a wire loose or something. i'm sure they'll figure it out.
     
    #5 bisco, Dec 29, 2011
  6. weste123

    weste123 New Member

    Joined:
    Dec 29, 2011
    3
    2
    0
    Location:
    Minnesota
    Vehicle:
    2008 Prius
    Model:
    Two
    Well, it turned out to be something simple, although some what out of the blue.

    During the routine oil change they checked the air filter and somehow a small paint chip got on the sensor and caused the system to kind of go into shut down mode. As soon as it was cleaned off, everything went back to normal.

    At least that is the explanation that was given to me.
     
    #6 weste123, Dec 30, 2011
    1 person likes this.
  7. drew_flux

    drew_flux Junior Member

    Joined:
    Jun 24, 2009
    73
    22
    0
    Location:
    sydney australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    I call bs, they may have left the afm unpluged.
     
    #7 drew_flux, Dec 30, 2011
    stormchaser likes this.
  8. tv4fish

    tv4fish Member

    Joined:
    Oct 21, 2011
    202
    46
    0
    Location:
    Minnesota
    Vehicle:
    2010 Prius
    Model:
    II
    You didn't say if you took it to a Toyota dealer or just an "oil change shop" ????
     
    #8 tv4fish, Dec 30, 2011
  9. weste123

    weste123 New Member

    Joined:
    Dec 29, 2011
    3
    2
    0
    Location:
    Minnesota
    Vehicle:
    2008 Prius
    Model:
    Two
    It wasnt Toyota although I know they called the dealership at a point to check out the error's they were getting.
     
    #9 weste123, Dec 30, 2011
  10. uart

    uart Senior Member

    Joined:
    Sep 7, 2009
    4,215
    1,202
    0
    Location:
    Australia
    Vehicle:
    2005 Prius
    I might have been a "fluke" event or they might have been a bit careless in leaving the intake uncovered for an unnecessary amount of time in a not too clean environment.
     
    #10 uart, Dec 30, 2011
  11. andyprius

    andyprius Senior Member

    Joined:
    Feb 21, 2005
    2,212
    188
    0
    Location:
    Sacramento, California.
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Meaning the MAF sensor? That's bizarre, but plausible
    :cheer2:
     
    #11 andyprius, Jan 1, 2012
  12. LexRoy

    LexRoy New Member

    Joined:
    May 6, 2016
    1
    0
    0
    Location:
    Battle Creek, MI
    Vehicle:
    2009 Prius
    Model:
    N/A
    Yesterday I took my perfectly running 2009 Toyota Prius with 105K miles in for a very basic oil change. The lady assisting also removed the air filter to show me its condition and then put it back. Once done I pulled out of the garage and on to the road. I would say within 15 seconds all the dash lights went on and the accelerator stopped working completely and I had to coast off the road to a safe location.
    Oil change people came out but had no clue what would have caused the car to do this nor a clue how to fix it. I ended up having it towed to my NORMAL oil change/mechanic where it sits now to be seen later. Will reference this original post as the situation sounds identical. GLAD I found these posts!
     
    #12 LexRoy, May 6, 2016
(You must log in or sign up to post here.)