1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Newbee Scanguage owner

Discussion in 'Gen 2 Prius Technical Discussion' started by AF1PRIUS, Oct 2, 2008.

  1. AF1PRIUS

    AF1PRIUS New Member

    Joined:
    Apr 23, 2008
    35
    0
    0
    Location:
    Southern, MD
    Vehicle:
    2011 Prius
    Model:
    Three
    I just ordered a scanguage and should be receiveing it this weekend :p. As the new owner of such a informative instrument, what parameters, if any should I program into the guage and monitor. In other words, is the stock setup ok or do I need to add some guages.

    AF1PRIUS
     
  2. Rokeby

    Rokeby Member

    Joined:
    Jan 21, 2008
    3,033
    708
    75
    Location:
    Ballamer, Merlin
    Vehicle:
    2008 Prius
    Congrats on your purchase. You'll forever thank yourself.

    It seems like most folks getting started with the SG start with RPMs, IGN,
    Coolant temp, and... ? its up to you, I use daily MPGs as I use MPGs at
    certain landmarks to gauge my accomplishment during my commute. (I
    leave the MPG figure on the MFD to accumulate "lifetime MPG." currently
    showing 50.3 over 12k miles.) As you get more sophisticated, you might
    use throttle position and/or HV battery draw -- the latter is an XGauge
    you have to program.

    There is just tons of ScanGauge related stuff here on PriusChat. Use the
    search function -- in the blue bar at the top of the page, off to the right --
    using "Scan Gauge" or "ScanGauge" for the search term. Then settle in for
    some serious education, there are lots and lots of threads, -- OMG, here's
    another! --and opinions to consider.
     
  3. AF1PRIUS

    AF1PRIUS New Member

    Joined:
    Apr 23, 2008
    35
    0
    0
    Location:
    Southern, MD
    Vehicle:
    2011 Prius
    Model:
    Three
    Thanks for the reply. I am sure that with the input I receive from fellow scanguage owners, I will improve my MPG and "Hypermiling" to the max. I will take your suggestions and look through the different posts to educate myself on the guage.

    AF1PRIUS
     
  4. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,985
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    Just remember to set the fuel type to "hybrid", otherwise the thing will keep shutting off on you. ;)
     
  5. archae86

    archae86 Member

    Joined:
    Jun 19, 2008
    153
    24
    0
    Location:
    Albuquerque, NM
    Vehicle:
    2006 Prius
    Some of the best Prius stuff available on the Scangauge requires you to set up user-configured parameters (XGauge). These are picky and tedious to enter, and finding the codes "out there" can be trouble. I suggest you check the cleanmpg forums.

    I've got several I like to look at, but on the Prius I think traction battery current is the one that was highly interesting, helped me understand some things about how the system works, and actually allows me to operate the car better.

    Just to give one example: with all the claims of how little brake wear some careful drivers see on their Prius, it was a real eye opener to see from the battery current display how easy it is to brake harder than the regeneration maximum at higher speeds. This display also really helped me better to understand what B mode on the shift selection really does, and thus when to use it (seldom, but not never, unless you drive in really flat country).
     
  6. jimsoh

    jimsoh New Member

    Joined:
    Apr 12, 2008
    30
    0
    0
    Location:
    west central Ohio
    Vehicle:
    2007 Prius
  7. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    Battery current is essential, and I just managed to work up one
    for fuel injector time. I'll let you go find it over on
    CleanMPG as an exercise [I also dropped a pointer here].
    .
    _H*
     
  8. AF1PRIUS

    AF1PRIUS New Member

    Joined:
    Apr 23, 2008
    35
    0
    0
    Location:
    Southern, MD
    Vehicle:
    2011 Prius
    Model:
    Three
    All I can say is WOW:eek:! What a wealth of information on the scanguage. Thanks for the information. Not being a programmer:nerd:, is it hard to enter in a new Xguage into scanguage? Hope not. I look forward to monitoring how my Prius functions internally and how I can maximize my FE.

    Thanks for all the help.

    AF1PRIUS
     
  9. jpadc

    jpadc Type before I think too often

    Joined:
    Sep 9, 2008
    343
    34
    0
    Location:
    Indianapolis and Northern Wisconsin
    Vehicle:
    2008 Prius
    Model:
    N/A
    I too will have one next week. Thanks jimsoh for the link to the database. I'm very interested in learning about electric use and regeneration. So geeky, but hey that's why lots of us drive this car.
     
  10. AF1PRIUS

    AF1PRIUS New Member

    Joined:
    Apr 23, 2008
    35
    0
    0
    Location:
    Southern, MD
    Vehicle:
    2011 Prius
    Model:
    Three
    Got my guage on Friday:p. Thanks Prius Shop:D! Now all I have to do is figue out what is what and start monitoring. There is a lot of information that can be used by Prius owners to take advantage of the "hypermiling" experience. I just need to figure out which ones.

    AF1PRIUS
     
  11. jpadc

    jpadc Type before I think too often

    Joined:
    Sep 9, 2008
    343
    34
    0
    Location:
    Indianapolis and Northern Wisconsin
    Vehicle:
    2008 Prius
    Model:
    N/A
    Mine came Saturday and by Sunday had my Bta Xgauge programed and working. Thanks all for the pointers and links to great info... Made the wifey drive while I checked out all the cool features. For those of you still thinking about this - I recommend you get one soon!