1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Need insight.....Rav 4 problem

Discussion in 'Gen 2 Prius Main Forum' started by tpmello, Dec 30, 2009.

  1. tpmello

    tpmello Junior Member

    Joined:
    Sep 12, 2007
    15
    1
    0
    Location:
    Manteca, CA
    Vehicle:
    2006 Prius
    My wife's 06' Rav 4 makes this "knock" noise which seems to be coming through the steering column when she turns her wheel. It almost always happens when making a left hand turn, and usually happens when turning right. I can only describe it as a quick knock sound.

    Has anyone had a similar problem in thier Prius or perhaps a Rav? I need help.

    -Todd
     
    #1 tpmello, Dec 30, 2009
  2. dorman68

    dorman68 Junior Member

    Joined:
    Apr 30, 2008
    4
    1
    0
    Location:
    Pa
    Vehicle:
    2004 Prius
    Sounds like a lower steering shaft that connects the column to the steering rack.
     
    #2 dorman68, Dec 31, 2009
    1 person likes this.
  3. 2Txns

    2Txns New Member

    Joined:
    Dec 30, 2009
    41
    0
    0
    Location:
    Goodyear, AZ
    Vehicle:
    2005 Prius
    Model:
    II
    Does it make the noise while the vehicle is moving or can it do it when stopped?

    If is only makes the noise while moving then I would say cv joint is failing.

    If it does it every time that you turn the steering wheel moving or stopped then it could be anything from the turn signal indicator, steering knuckle needing lubricant, or even the steering rack.
     
    #3 2Txns, Jan 1, 2010
  4. tpmello

    tpmello Junior Member

    Joined:
    Sep 12, 2007
    15
    1
    0
    Location:
    Manteca, CA
    Vehicle:
    2006 Prius

    I'm not sure if it makes the noise while in park....I'll have to check that out. I know for sure it makes it while driving. Either way, sounds like I will have to call up the dealer. Thanks for the input.
     
    #4 tpmello, Jan 5, 2010
  5. danl

    danl New Member

    Joined:
    Jan 26, 2009
    231
    6
    0
    Location:
    Boston, MA
    Vehicle:
    2009 Prius
    CV joint. Check the rubber wrap over the joint and make sure there's lubricant in there. What typically happens is that the rubber is ripped and the lubricant leaks out and you drive the car with the joint bone dry. That causes damage to the ball bearings within the joint, and if that's the case, the joint itself might need to be replaced.
     
    #5 danl, Jan 5, 2010
(You must log in or sign up to post here.)