1. Attachments are working again! Check out this thread for more details and to report any other bugs.

need help with part ID; is this from my prius?

Discussion in 'Prius c Main Forum' started by novasquid, Oct 21, 2014.

  1. novasquid

    novasquid Junior Member

    Joined:
    Mar 3, 2013
    49
    15
    0
    Location:
    Northern VA
    Vehicle:
    2013 Prius c
    Model:
    Four
    i was cleaning out my car interior the other day, and i found this strange plastic piece on the floor on the front passenger side. it's hard to see in the pic, but it's six sided. it has a hole in the center and looks to be designed to be screwed onto something. any ideas what it is, and where it came from? i haven't been carrying anything in the front passenger seat, so i assume it's from the prius.

    [​IMG]
     
    #1 novasquid, Oct 21, 2014
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    What does the other side look like
     
    #2 JC91006, Oct 21, 2014
  3. novasquid

    novasquid Junior Member

    Joined:
    Mar 3, 2013
    49
    15
    0
    Location:
    Northern VA
    Vehicle:
    2013 Prius c
    Model:
    Four
    two more pics:

    [​IMG]

    [​IMG]
     
    #3 novasquid, Oct 21, 2014
  4. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,340
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    That looks like a cap to cover bolt threads and probably to hold something in place. You may want to look up behind the glove box and see if you see any missing.

    Also remove the glove box and see if can be part of the AC blower motor assembly.
     
    #4 jdcollins5, Oct 21, 2014
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,677
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Could it be a glove box stop pin? Not sure. Think they'd be round, not hex.
     
    #5 Mendel Leisk, Oct 21, 2014
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Last time I saw something similar is on the back corner trays in the hatch section of the Prius hatchbacks. It's the nut that holds down the tray
     
    #6 JC91006, Oct 21, 2014
  7. novasquid

    novasquid Junior Member

    Joined:
    Mar 3, 2013
    49
    15
    0
    Location:
    Northern VA
    Vehicle:
    2013 Prius c
    Model:
    Four
    found it! i looked under the glove compartment and saw an exposed thread. i put the cap onto it and it fit like it was made for it. i looked over to the driver's side under the dash, and there's an identical part there too. it holds down some of the plastic molding around the leg area. thanks guys!
     
    #7 novasquid, Oct 21, 2014
    jdcollins5 and Mendel Leisk like this.
  8. Motov8r

    Motov8r Member

    Joined:
    May 25, 2014
    102
    41
    0
    Vehicle:
    2013 Prius c
    Model:
    Two
    That is typically used to hold down the forward inside edge of the kick panel. Have the same thing in my sequoia.


    iPhone ?
     
    #8 Motov8r, Oct 22, 2014
(You must log in or sign up to post here.)