Mystery part left over. Where does it go?

I removed the intake manifold, EGR valve and cooler, brake booster pump, master cylinder, and traction battery. The bracket came from one of those areas. The bracket has 2 oblong holes typically used for cable clips. But I have searched for dangling cable clips that are not secured and do not see any.
I have not reassembled the wiper blades and cowl, but I looked at youtube videos and do not see this bracket mentioned. The bracket has 2 bolt holes for bolts. see attached images

 

I could not see any unsupported wire clips nor places to bolt the bracket down under the metal cowl. I watched 2 videos of replacing the spark plugs. I did not see the mystery bracket. There is a bracket on top of the metal cowl that supports the cowl.
But it was a good guess. Thanks.

 

Thank you. I will do that. I am embarressed to write that there are also 3 screws that are left over. (81 years old and senilel) They do not have caked-on oil or dirt on them, so maybe not from engine area. See pic. They are M6 screws that a 10mm or phillips head screwdriver will fit.

 

ASRDogman-Thanks. I found the bracket in an illustrated parts breakdown. It looks like it attaches to the booster pump and maybe the master cylinder. I dread having to remove things in the way to replace it. I hope that I will not need to remove the master cylinder.
Thanks for your help. part 44595

 

The bracket only supported a wire harness. I worried that it supported the pump. I installed the bracket in one hour. The screws were left at the car by my grandson from another project.
Thanks again.