1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Loose bit of heat shield

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Bookkeepper, Mar 24, 2019.

  1. Bookkeepper

    Bookkeepper Junior Member

    Joined:
    Jul 23, 2018
    10
    7
    14
    Location:
    Pennsylvania, USA
    Vehicle:
    2010 Prius
    Model:
    II
    So over the winter I managed to scrape the belly on some hard-packed snow. Ever since I have heard a faint but noticeable clanging of metal-on-metal while driving. I had deduced it was something loose under the car because I only hear it when going over a bump or when the engine is running while stationary. Because of the 'engine running' bit I thought it must be near the exhaust system.

    Well, today it was warm enough to squeeze under the car and discover...

    Looks like the heat shield. Anyone know how it's normally attached at the back, or have ideas to get it back up above the exhaust instead of resting on it? In a week or so I'll be able to get the car up on a ramp and take a closer look...
     
    #1 Bookkeepper, Mar 24, 2019
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Just keep bending until no more noise when ice kicks in
     
    #2 tankyuong, Mar 24, 2019
(You must log in or sign up to post here.)