1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Liftgate garnish - replace or repair?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Joseph C, Dec 28, 2019.

Tags:
  1. Joseph C

    Joseph C Junior Member

    Joined:
    Dec 26, 2019
    7
    2
    0
    Location:
    Canada
    Vehicle:
    2009 Prius
    Model:
    Base
    80704489_522123341719507_5541012019525713920_n.jpg 80614689_510417982933281_7146878090814160896_n.jpg 80602337_462915534421703_8710140697866403840_n.jpg 2009 Prius. Previous owner ripped off part of the liftgate garnish. His efforts also created a solid rip through the center of the garnish.

    See photos: would this be a full replacement of the liftgate garnish, or can I do a little DIY fix job? Looks like the prime suspect is the plastic ripping off just above what seems to be a screw?

    Yes, the car is dirty, I'm cleaning it today (y)
     
    #1 Joseph C, Dec 28, 2019
  2. riveter

    riveter Junior Member

    Joined:
    Nov 13, 2021
    2
    1
    5
    Location:
    contra costa
    Vehicle:
    2004 Prius
    Model:
    Base
    I repaired mine by drilling holes through the exterior of the garnish at the same angle of the original square top bolts.
    I bought two M5 bolts with the same thread that are about 2 3/8” long, four 1” washers, and two rubber gaskets. I reused the factory nuts.
    Look at my photos and let me know if you have any questions.
    It feels really solid now.
     
    #2 riveter, Apr 6, 2023
(You must log in or sign up to post here.)